Read from remote host localhost: Connection reset Connection to localhost closed. client_loop: send disconnect: Connection reset

[umarahzamy]

what am i missing doing wrong here, i tried to run ssh server in windows 11, im not a poweruser by any means.

i installed the openssh with scoop. step reproduced:

1. check openssh from windows capability (admin pwsh)

Get-WindowsCapability -Online | Where-Object Name -like 'OpenSSH.*'

Name  : OpenSSH.Client~~~~0.0.1.0
State : NotPresent
Name  : OpenSSH.Server~~~~0.0.1.0
State : NotPresent

3. install openssh from scoop (admin pwsh)

scoop install openssh
then execute the install-sshd.ps1 with admin/elevated pwsh

4. run ssh-keygen.exe (admin pwsh)

ssh-keygen.exe and ssh-keygen -A. which generate ~/.ssh and env:PROGRAMDATA/ssh directory

5. add sshd_config to $env:PROGRAMDATA/ssh

Get-Content $env:PROGRAMDATA/ssh/sshd_config
Port 22
ListenAddress 0.0.0.0
HostKey __PROGRAMDATA__/ssh/ssh_host_rsa_key
HostKey __PROGRAMDATA__/ssh/ssh_host_ecdsa_key
HostKey __PROGRAMDATA__/ssh/ssh_host_ed25519_key

SyslogFacility AUTH
LogLevel INFO

PermitRootLogin no

PubkeyAuthentication no

AuthorizedKeysFile      .ssh/authorized_keys

PasswordAuthentication yes

Subsystem       sftp    sftp-server.exe

Match Group administrators
       AuthorizedKeysFile __PROGRAMDATA__/ssh/administrators_authorized_keys

6. run FixHost and FixUser rights

"$HOME/scoop/apps/openssh/current/FixUserFilePermissions.ps1"
  [*] C:\ProgramData\ssh\administrators_authorized_keys
      looks good

   Done.
   
 . "$HOME/scoop/apps/openssh/current/FixHostFilePermissions.ps1"
  [*] C:\ProgramData\ssh\sshd_config
      looks good

  [*] C:\ProgramData\ssh\ssh_host_ecdsa_key
      looks good

  [*] C:\ProgramData\ssh\ssh_host_ecdsa_key.pub
      looks good

  [*] C:\ProgramData\ssh\ssh_host_ed25519_key
      looks good

  [*] C:\ProgramData\ssh\ssh_host_ed25519_key.pub
      looks good

  [*] C:\ProgramData\ssh\ssh_host_rsa_key
      looks good

  [*] C:\ProgramData\ssh\ssh_host_rsa_key.pub
      looks good

   Done.

7. set windows firewall tcp port 22 (admin pwsh)
   command from [https://learn.microsoft.com/en-us/windows-server/administration/openssh/openssh_install_firstuse?tabs=powershell&pivots=windows-server-2019]

if (!(Get-NetFirewallRule -Name "OpenSSH-Server-In-TCP" -ErrorAction SilentlyContinue | Select-Object Name, Enabled)) {
    Write-Output "Firewall Rule 'OpenSSH-Server-In-TCP' does not exist, creating it..."
    New-NetFirewallRule -Name 'OpenSSH-Server-In-TCP' -DisplayName 'OpenSSH Server (sshd)' -Enabled True -Direction Inbound -Protocol TCP -Action Allow -LocalPort 22
} else {
    Write-Output "Firewall rule 'OpenSSH-Server-In-TCP' has been created and exists."
}

after those installation process, i run sshd.exe -d -ddd with admin pwsh right

sshd.exe -d -ddd
debug2: load_server_config: filename __PROGRAMDATA__\\ssh/sshd_config
debug2: load_server_config: done config len = 451
debug2: parse_server_config_depth: config __PROGRAMDATA__\\ssh/sshd_config len 451
debug3: __PROGRAMDATA__\\ssh/sshd_config:1 setting Port 22
debug3: __PROGRAMDATA__\\ssh/sshd_config:2 setting ListenAddress 0.0.0.0
debug3: __PROGRAMDATA__\\ssh/sshd_config:3 setting HostKey __PROGRAMDATA__/ssh/ssh_host_rsa_key
debug3: __PROGRAMDATA__\\ssh/sshd_config:4 setting HostKey __PROGRAMDATA__/ssh/ssh_host_ecdsa_key
debug3: __PROGRAMDATA__\\ssh/sshd_config:5 setting HostKey __PROGRAMDATA__/ssh/ssh_host_ed25519_key
debug3: __PROGRAMDATA__\\ssh/sshd_config:7 setting SyslogFacility AUTH
debug3: __PROGRAMDATA__\\ssh/sshd_config:8 setting LogLevel INFO
debug3: __PROGRAMDATA__\\ssh/sshd_config:10 setting PermitRootLogin no
debug3: __PROGRAMDATA__\\ssh/sshd_config:12 setting PubkeyAuthentication no
debug3: __PROGRAMDATA__\\ssh/sshd_config:14 setting AuthorizedKeysFile .ssh/authorized_keys
debug3: __PROGRAMDATA__\\ssh/sshd_config:16 setting PasswordAuthentication yes
debug3: __PROGRAMDATA__\\ssh/sshd_config:18 setting Subsystem sftp      sftp-server.exe
debug3: checking syntax for 'Match Group administrators'
debug1: sshd version OpenSSH_for_Windows_9.8 Win32-OpenSSH-GitHub, LibreSSL 4.0.0
debug1: private host key #0: ssh-rsa SHA256:oT7BgRfmlfT9CnRfLusb+w/zS2utrTuJYvCAFcLyAZg
debug1: private host key #1: ecdsa-sha2-nistp256 SHA256:GA5YIeTe3wwl+jTpIEfp6nWPdJVCM/YccVK/KQawD0Q
debug1: private host key #2: ssh-ed25519 SHA256:6p51A661KOYJBWFdd655TVnaACdI1KqG1G3cLS/cIXk
debug1: get_passwd: lookup_sid() failed: 1332.
debug1: rexec_argv[1]='-d'
debug1: rexec_argv[2]='-ddd'
debug3: using c:\\users\\x270\\scoop\\apps\\openssh\\current/sshd-session.exe for re-exec
debug2: fd 7 setting O_NONBLOCK
debug1: Bind to port 22 on 0.0.0.0.
Server listening on 0.0.0.0 port 22.
debug3: pselect: installing signal handler for 3, previous 00007FF7A742F860
debug3: pselect: installing signal handler for 6, previous 00007FF7A742F840
debug3: pselect: installing signal handler for 7, previous 00007FF7A742F850
debug3: pselect: installing signal handler for 8, previous 00007FF7A742F850
debug3: pselect_notify_setup: initializing
debug2: fd 10 setting O_NONBLOCK
debug2: fd 8 setting O_NONBLOCK
debug3: pselect_notify_setup: pid 68 saved 68 pipe0 10 pipe1 8

while sshd ran, i verify with

netstat -ano | findstr :22
  TCP    0.0.0.0:22             0.0.0.0:0              LISTENING       68

this is the detailed ssh -vvv output when i try to connect to ssh

ssh -vvv  x270\x270@localhost
OpenSSH_for_Windows_9.8p2 Win32-OpenSSH-GitHub, LibreSSL 4.0.0
debug3: Failed to open file:C:/Users/x270/.ssh/config error:2
debug3: Failed to open file:C:/ProgramData/ssh/ssh_config error:2
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> 'C:\\Users\\x270/.ssh/known_hosts'
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> 'C:\\Users\\x270/.ssh/known_hosts2'
debug2: resolving "localhost" port 22
debug3: resolve_host: lookup localhost:22
debug3: channel_clear_timeouts: clearing
debug3: ssh_connect_direct: entering
debug1: Connecting to localhost [::1] port 22.
debug3: finish_connect - ERROR: async io completed with error: 10061, io:000001EE0A6236F0
debug1: connect to address ::1 port 22: Connection refused
debug1: Connecting to localhost [127.0.0.1] port 22.
debug1: Connection established.
debug3: Failed to open file:C:/Users/x270/.ssh/id_rsa error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_rsa.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_rsa error:2
debug1: identity file C:\\Users\\x270/.ssh/id_rsa type -1
debug3: Failed to open file:C:/Users/x270/.ssh/id_rsa-cert error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_rsa-cert.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_rsa-cert error:2
debug1: identity file C:\\Users\\x270/.ssh/id_rsa-cert type -1
debug3: Failed to open file:C:/Users/x270/.ssh/id_ecdsa error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_ecdsa.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_ecdsa error:2
debug1: identity file C:\\Users\\x270/.ssh/id_ecdsa type -1
debug3: Failed to open file:C:/Users/x270/.ssh/id_ecdsa-cert error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_ecdsa-cert.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_ecdsa-cert error:2
debug1: identity file C:\\Users\\x270/.ssh/id_ecdsa-cert type -1
debug3: Failed to open file:C:/Users/x270/.ssh/id_ecdsa_sk error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_ecdsa_sk.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_ecdsa_sk error:2
debug1: identity file C:\\Users\\x270/.ssh/id_ecdsa_sk type -1
debug3: Failed to open file:C:/Users/x270/.ssh/id_ecdsa_sk-cert error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_ecdsa_sk-cert.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_ecdsa_sk-cert error:2
debug1: identity file C:\\Users\\x270/.ssh/id_ecdsa_sk-cert type -1
debug3: Failed to open file:C:/Users/x270/.ssh/id_ed25519 error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_ed25519.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_ed25519 error:2
debug1: identity file C:\\Users\\x270/.ssh/id_ed25519 type -1
debug3: Failed to open file:C:/Users/x270/.ssh/id_ed25519-cert error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_ed25519-cert.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_ed25519-cert error:2
debug1: identity file C:\\Users\\x270/.ssh/id_ed25519-cert type -1
debug3: Failed to open file:C:/Users/x270/.ssh/id_ed25519_sk error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_ed25519_sk.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_ed25519_sk error:2
debug1: identity file C:\\Users\\x270/.ssh/id_ed25519_sk type -1
debug3: Failed to open file:C:/Users/x270/.ssh/id_ed25519_sk-cert error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_ed25519_sk-cert.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_ed25519_sk-cert error:2
debug1: identity file C:\\Users\\x270/.ssh/id_ed25519_sk-cert type -1
debug3: Failed to open file:C:/Users/x270/.ssh/id_xmss error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_xmss.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_xmss error:2
debug1: identity file C:\\Users\\x270/.ssh/id_xmss type -1
debug3: Failed to open file:C:/Users/x270/.ssh/id_xmss-cert error:2
debug3: Failed to open file:C:/Users/x270/.ssh/id_xmss-cert.pub error:2
debug3: failed to open file:C:/Users/x270/.ssh/id_xmss-cert error:2
debug1: identity file C:\\Users\\x270/.ssh/id_xmss-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_for_Windows_9.8 Win32-OpenSSH-GitHub
debug1: Remote protocol version 2.0, remote software version OpenSSH_for_Windows_9.8 Win32-OpenSSH-GitHub
debug1: compat_banner: match: OpenSSH_for_Windows_9.8 Win32-OpenSSH-GitHub pat OpenSSH* compat 0x04000000
debug2: fd 3 setting O_NONBLOCK
debug1: Authenticating to localhost:22 as 'x270\\x270'
debug3: record_hostkey: found key type ED25519 in file C:\\Users\\x270/.ssh/known_hosts:4
debug3: load_hostkeys_file: loaded 1 keys from localhost
debug3: Failed to open file:C:/Users/x270/.ssh/known_hosts2 error:2
debug1: load_hostkeys: fopen C:\\Users\\x270/.ssh/known_hosts2: No such file or directory
debug3: Failed to open file:C:/ProgramData/ssh/ssh_known_hosts error:2
debug1: load_hostkeys: fopen __PROGRAMDATA__\\ssh/ssh_known_hosts: No such file or directory
debug3: Failed to open file:C:/ProgramData/ssh/ssh_known_hosts2 error:2
debug1: load_hostkeys: fopen __PROGRAMDATA__\\ssh/ssh_known_hosts2: No such file or directory
debug3: order_hostkeyalgs: have matching best-preference key type [email protected], using HostkeyAlgorithms verbatim
debug3: send packet: type 20
debug1: SSH2_MSG_KEXINIT sent
debug3: receive packet: type 20
debug1: SSH2_MSG_KEXINIT received
debug2: local client KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,[email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,ext-info-c,[email protected]
debug2: host key algorithms: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],rsa-sha2-512,rsa-sha2-256
debug2: ciphers ctos: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: ciphers stoc: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: MACs ctos: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512
debug2: MACs stoc: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512
debug2: compression ctos: none,[email protected],zlib
debug2: compression stoc: none,[email protected],zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug2: peer server KEXINIT proposal
debug2: KEX algorithms: curve25519-sha256,[email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,ext-info-s,[email protected]
debug2: host key algorithms: rsa-sha2-512,rsa-sha2-256,ecdsa-sha2-nistp256,ssh-ed25519
debug2: ciphers ctos: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: ciphers stoc: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: MACs ctos: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512
debug2: MACs stoc: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512
debug2: compression ctos: none,[email protected]
debug2: compression stoc: none,[email protected]
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug3: kex_choose_conf: will use strict KEX ordering
debug1: kex: algorithm: curve25519-sha256
debug1: kex: host key algorithm: ssh-ed25519
debug1: kex: server->client cipher: [email protected] MAC: <implicit> compression: none
debug1: kex: client->server cipher: [email protected] MAC: <implicit> compression: none
debug3: send packet: type 30
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug3: receive packet: type 31
debug1: SSH2_MSG_KEX_ECDH_REPLY received
debug1: Server host key: ssh-ed25519 SHA256:6p51A661KOYJBWFdd655TVnaACdI1KqG1G3cLS/cIXk
debug3: record_hostkey: found key type ED25519 in file C:\\Users\\x270/.ssh/known_hosts:4
debug3: load_hostkeys_file: loaded 1 keys from localhost
debug3: Failed to open file:C:/Users/x270/.ssh/known_hosts2 error:2
debug1: load_hostkeys: fopen C:\\Users\\x270/.ssh/known_hosts2: No such file or directory
debug3: Failed to open file:C:/ProgramData/ssh/ssh_known_hosts error:2
debug1: load_hostkeys: fopen __PROGRAMDATA__\\ssh/ssh_known_hosts: No such file or directory
debug3: Failed to open file:C:/ProgramData/ssh/ssh_known_hosts2 error:2
debug1: load_hostkeys: fopen __PROGRAMDATA__\\ssh/ssh_known_hosts2: No such file or directory
debug1: Host 'localhost' is known and matches the ED25519 host key.
debug1: Found key in C:\\Users\\x270/.ssh/known_hosts:4
debug3: send packet: type 21
debug1: ssh_packet_send2_wrapped: resetting send seqnr 3
debug2: ssh_set_newkeys: mode 1
debug1: rekey out after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: Sending SSH2_MSG_EXT_INFO
debug3: send packet: type 7
debug1: expecting SSH2_MSG_NEWKEYS
debug3: receive packet: type 21
debug1: ssh_packet_read_poll2: resetting read seqnr 3
debug1: SSH2_MSG_NEWKEYS received
debug2: ssh_set_newkeys: mode 0
debug1: rekey in after 134217728 blocks
debug2: KEX algorithms: curve25519-sha256,[email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,ext-info-c,[email protected]
debug2: host key algorithms: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],rsa-sha2-512,rsa-sha2-256
debug2: ciphers ctos: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: ciphers stoc: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: MACs ctos: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512
debug2: MACs stoc: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512
debug2: compression ctos: none,[email protected],zlib
debug2: compression stoc: none,[email protected],zlib
debug2: languages ctos:
debug2: languages stoc:
debug2: first_kex_follows 0
debug2: reserved 0
debug3: send packet: type 5
debug3: receive packet: type 7
debug1: SSH2_MSG_EXT_INFO received
debug3: kex_input_ext_info: extension server-sig-algs
debug1: kex_ext_info_client_parse: server-sig-algs=<ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],rsa-sha2-512,rsa-sha2-256>
debug3: kex_input_ext_info: extension [email protected]
debug1: kex_ext_info_check_ver: [email protected]=<0>
debug3: kex_input_ext_info: extension [email protected]
debug1: kex_ext_info_check_ver: [email protected]=<0>
debug3: receive packet: type 6
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug3: send packet: type 50
debug3: receive packet: type 7
debug1: SSH2_MSG_EXT_INFO received
debug3: kex_input_ext_info: extension server-sig-algs
debug1: kex_ext_info_client_parse: server-sig-algs=<ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],rsa-sha2-512,rsa-sha2-256>
debug3: receive packet: type 51
debug1: Authentications that can continue: password,keyboard-interactive
debug3: start over, passed a different list password,keyboard-interactive
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup keyboard-interactive
debug3: remaining preferred: password
debug3: authmethod_is_enabled keyboard-interactive
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug3: send packet: type 50
debug2: we sent a keyboard-interactive packet, wait for reply
debug3: receive packet: type 51
debug1: Authentications that can continue: password,keyboard-interactive
debug3: userauth_kbdint: disable: no info_req_seen
debug2: we did not send a packet, disable method
debug3: authmethod_lookup password
debug3: remaining preferred:
debug3: authmethod_is_enabled password
debug1: Next authentication method: password
x270\x270@localhost's password:
debug3: send packet: type 50
debug2: we sent a password packet, wait for reply
debug3: receive packet: type 52
Authenticated to localhost ([127.0.0.1]:22) using "password".
debug1: channel 0: new session [client-session] (inactive timeout: 0)
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug3: send packet: type 90
debug1: Requesting [email protected]
debug3: send packet: type 80
debug1: Entering interactive session.
debug1: pledge: filesystem
debug3: client_repledge: enter
debug1: ENABLE_VIRTUAL_TERMINAL_INPUT is supported. Reading the VTSequence from console
debug3: This windows OS supports conpty
debug1: ENABLE_VIRTUAL_TERMINAL_PROCESSING is supported. Console supports the ansi parsing
debug3: Successfully set console output code page from:65001 to 65001
debug3: Successfully set console input code page from:850 to 65001
debug3: pselect: installing signal handler for 0, previous 00007FF629061370
debug3: pselect: installing signal handler for 3, previous 00007FF629081290
debug3: pselect: installing signal handler for 6, previous 00007FF629061370
debug3: pselect: installing signal handler for 7, previous 00007FF629061370
debug3: pselect: installing signal handler for 8, previous 00007FF629061370
debug3: pselect: installing signal handler for 11, previous 00007FF629061360
debug3: pselect_notify_setup: initializing
debug2: fd 9 setting O_NONBLOCK
debug2: fd 7 setting O_NONBLOCK
debug3: pselect_notify_setup: pid 13620 saved 13620 pipe0 9 pipe1 7
debug3: WSARecv - WSARecv() ERROR: io:000001EE0A6236F0 10054
debug3: recv - from CB ERROR:108, io:000001EE0A6236F0
Read from remote host localhost: Unknown error
Connection to localhost closed.
debug3: send packet: type 1
debug3: send - WSASend() ERROR:10054, io:000001EE0A6236F0
client_loop: send disconnect: Connection reset
debug3: Successfully set console output code page from 65001 to 65001
debug3: Successfully set console input code page from 65001 to 850

general information
verify the current shell session is admin/elevated

(New-Object Security.Principal.WindowsPrincipal([Security.Principal.WindowsIdentity]::GetCurrent())).IsInRole([Security.Principal.WindowsBuiltInRole]::Administrator)
True

user target which i sshing into

whoami
x270\x270

openssh version

scoop info openssh

Name        : openssh
Description : The premier connectivity tool for remote login with the SSH protocol. (Microsoft build)
Version     : 9.8.3.0p2
Bucket      : main
Website     : https://www.openssh.com
License     : SSH-OpenSSH
Updated at  : 4/19/2025 4:28:06 AM
Updated by  : github-actions[bot]
Installed   : 9.8.3.0p2
Binaries    : scp.exe | sftp.exe | sftp-server.exe | ssh.exe | ssh-add.exe | ssh-agent.exe | ssh-keygen.exe | ssh-keyscan.exe |
              ssh-shellhost.exe | sshd.exe
Notes       : Windows 10 or higher includes this build of OpenSSH in the system itself, hence it is recommended to use the system
              OpenSSH there.
              Run 'sudo <root>\install-sshd.ps1' to install sshd and ssh-agent as a service.
              Run 'sudo <root>\uninstall-sshd.ps1' to uninstall the services.

[tgauth]

after those installation process, i run sshd.exe -d -ddd with admin pwsh right

This runs the ssh server in debug mode, which requires key-based authentication, but password authentication was used per the logs ("Authenticated to localhost ([127.0.0.1]:22) using "password"). Debug mode should only be used for troubleshooting - see https://github.com/PowerShell/Win32-OpenSSH/wiki/Troubleshooting-Steps for more information.

Ensure the ssh server service is running, using PowerShell: Get-Service sshd
If it is not running, start the service using PowerShell: Start-Service sshd

Also, please see the following link for getting started with the in-box OpenSSH server: https://learn.microsoft.com/en-us/windows-server/administration/openssh/openssh_install_firstuse?tabs=powershell&pivots=windows-server-2022#install-openssh-for-windows-server