loadvars.sh

#!/bin/bash

run_soc_module() {
	openwbDebugLog "MAIN" 2 "Request to run SoC-Module: $1"
	module_dir="modules/$1"
	if [ -f "$module_dir/main.sh" ]
	then
		openwbDebugLog "MAIN" 2 "Calling SoC-Module: $module_dir/main.sh"
		"$module_dir/main.sh" &
	elif [[ "$module_dir" =~ ^(.*)((s)([1-9])|(lp)([2-9]))$ ]]; then
		# Historically if each SoC-Module applied to a single charge point, only. Thus if multiple charge points were
		# to be supported the module was copied and got the suffix "s1" or "lp2" for the second charge point.
		# With the new structure we call the script for charge point one with the actual charge point number as parameter
		if [ "${BASH_REMATCH[3]}" == "s" ]
		then
			charge_point_num=$((BASH_REMATCH[4] + 1))
		else
			charge_point_num=${BASH_REMATCH[6]}
		fi
		module_dir_lp1=${BASH_REMATCH[1]}
		if [ -d "$module_dir_lp1" ];
		then
			openwbDebugLog "MAIN" 2 "Calling SoC-Module: $module_dir_lp1/main.sh for chargepoint $charge_point_num"
			"$module_dir_lp1/main.sh" "$charge_point_num" &
		else
			openwbDebugLog "MAIN" 0 "Neither '$module_dir' nor '$module_dir_lp1' exist!"
		fi
	else
		openwbDebugLog "MAIN" 0 "SoC-Module '$module_dir' does not exist"
	fi
}

loadvars(){
	#reload mqtt vars
	renewmqtt=$(</var/www/html/openWB/ramdisk/renewmqtt)
	if ((renewmqtt == 1)); then
		echo 0 > /var/www/html/openWB/ramdisk/renewmqtt
		echo 01 | tee ramdisk/mqtt*
	fi

	#get temp vars
	sofortll=$(<ramdisk/lp1sofortll)
	sofortlls1=$(<ramdisk/lp2sofortll)
	sofortlls2=$(<ramdisk/lp3sofortll)
	sofortlllp4=$(<ramdisk/lp4sofortll)
	sofortlllp5=$(<ramdisk/lp5sofortll)
	sofortlllp6=$(<ramdisk/lp6sofortll)
	sofortlllp7=$(<ramdisk/lp7sofortll)
	sofortlllp8=$(<ramdisk/lp8sofortll)

	#get oldvars for mqtt
	opvwatt=$(<ramdisk/mqttpvwatt)
	owattbezug=$(<ramdisk/mqttwattbezug)
	ollaktuell=$(<ramdisk/mqttladeleistunglp1)
	ohausverbrauch=$(<ramdisk/mqtthausverbrauch)
	ollkombiniert=$(<ramdisk/llkombiniert)
	ollaktuells1=$(<ramdisk/mqttladeleistungs1)
	ollaktuells2=$(<ramdisk/mqttladeleistungs2)
	ospeicherleistung=$(<ramdisk/mqttspeicherleistung)
	oladestatus=$(<ramdisk/mqttlastladestatus)
	olademodus=$(<ramdisk/mqttlastlademodus)
	osoc=$(<ramdisk/mqttsoc)
	osoc1=$(<ramdisk/mqttsoc1)
	ostopchargeafterdisclp1=$(<ramdisk/mqttstopchargeafterdisclp1)
	ostopchargeafterdisclp2=$(<ramdisk/mqttstopchargeafterdisclp2)
	ostopchargeafterdisclp3=$(<ramdisk/mqttstopchargeafterdisclp3)
	ostopchargeafterdisclp4=$(<ramdisk/mqttstopchargeafterdisclp4)
	ostopchargeafterdisclp5=$(<ramdisk/mqttstopchargeafterdisclp5)
	ostopchargeafterdisclp6=$(<ramdisk/mqttstopchargeafterdisclp6)
	ostopchargeafterdisclp7=$(<ramdisk/mqttstopchargeafterdisclp7)
	ostopchargeafterdisclp8=$(<ramdisk/mqttstopchargeafterdisclp8)
	ospeichersoc=$(<ramdisk/mqttspeichersoc)
	ladestatus=$(</var/www/html/openWB/ramdisk/ladestatus)
	odailychargelp1=$(<ramdisk/mqttdailychargelp1)
	odailychargelp2=$(<ramdisk/mqttdailychargelp2)
	odailychargelp3=$(<ramdisk/mqttdailychargelp3)
	oaktgeladens1=$(<ramdisk/mqttaktgeladens1)
	oaktgeladens2=$(<ramdisk/mqttaktgeladens2)
	oaktgeladen=$(<ramdisk/mqttaktgeladen)
	orestzeitlp1=$(<ramdisk/mqttrestzeitlp1)
	orestzeitlp2=$(<ramdisk/mqttrestzeitlp2)
	orestzeitlp3=$(<ramdisk/mqttrestzeitlp3)
	ogelrlp1=$(<ramdisk/mqttgelrlp1)
	ogelrlp2=$(<ramdisk/mqttgelrlp2)
	ogelrlp3=$(<ramdisk/mqttgelrlp3)
	olastregelungaktiv=$(<ramdisk/lastregelungaktiv)
	ohook1aktiv=$(<ramdisk/hook1akt)
	ohook2aktiv=$(<ramdisk/hook2akt)
	ohook3aktiv=$(<ramdisk/hook3akt)
	lp1enabled=$(<ramdisk/lp1enabled)
	lp2enabled=$(<ramdisk/lp2enabled)
	lp3enabled=$(<ramdisk/lp3enabled)
	lp4enabled=$(<ramdisk/lp4enabled)
	lp5enabled=$(<ramdisk/lp5enabled)
	lp6enabled=$(<ramdisk/lp6enabled)
	lp7enabled=$(<ramdisk/lp7enabled)
	lp8enabled=$(<ramdisk/lp8enabled)

	version=$(<web/version)
	# EVSE DIN Plug State
	declare -r IsNumberRegex='^[0-9]+$'
	if [[ $evsecon == "modbusevse" ]]; then
		if ((modbusevseid == 0)); then
			if [ -f /var/www/html/openWB/ramdisk/evsemodulconfig ]; then
				modbusevsesource=$(<ramdisk/evsemodulconfig)
				modbusevseid=1
			else
				if [[ -e "/dev/ttyUSB0" ]]; then
					echo "/dev/ttyUSB0" > ramdisk/evsemodulconfig
				elif [[ -e "/dev/ttyACM0" ]]; then
					echo "/dev/ttyACM0" > ramdisk/evsemodulconfig
				else
					echo "/dev/serial0" > ramdisk/evsemodulconfig
				fi
				modbusevsesource=$(<ramdisk/evsemodulconfig)
				modbusevseid=1

			fi
		fi
		evseplugstate=$(sudo python3 runs/readmodbus.py "$modbusevsesource" "$modbusevseid" 1002 1)
		if [ -z "${evseplugstate}" ] || ! [[ "${evseplugstate}" =~ $IsNumberRegex ]]; then
			# EVSE read returned empty or non-numeric value --> use last state for this loop
			evseplugstate=$(</var/www/html/openWB/ramdisk/evseplugstate)
			openwbDebugLog "MAIN" 0 "Modbus EVSE read CP1 issue - using previous state '${evseplugstate}'"
		else
			echo "$evseplugstate" > /var/www/html/openWB/ramdisk/evseplugstate
		fi
		ladestatuslp1=$(</var/www/html/openWB/ramdisk/ladestatus)
		if ((evseplugstate >= 0)) && ((evseplugstate <= 10)); then
			if ((evseplugstate > 1)); then
				plugstat=$(</var/www/html/openWB/ramdisk/plugstat)
				if ((plugstat == 0)) ; then
					if ((pushbplug == 1)) && ((ladestatuslp1 == 0)) && ((pushbenachrichtigung == 1)) ; then
						message="Fahrzeug eingesteckt. Ladung startet bei erfüllter Ladebedingung automatisch."
						/var/www/html/openWB/runs/pushover.sh "$message"
					fi
					if ((displayconfigured == 1)) && ((displayEinBeimAnstecken == 1)) ; then
						export DISPLAY=:0 && xset dpms force on && xset dpms "$displaysleep" "$displaysleep" "$displaysleep"
					fi
					echo 20000 > /var/www/html/openWB/ramdisk/soctimer
				fi
				echo 1 > /var/www/html/openWB/ramdisk/plugstat
				plugstat=1
			else
				echo 0 > /var/www/html/openWB/ramdisk/plugstat
				plugstat=0
			fi
			if ((evseplugstate > 2)) && ((ladestatuslp1 == 1)) && ((lp1enabled == 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/chargestat
				chargestat=1
			else
				echo 0 > /var/www/html/openWB/ramdisk/chargestat
				chargestat=0
			fi
		fi
	else
		pluggedin=$(</var/www/html/openWB/ramdisk/pluggedin)
		if ((pluggedin > 0)); then
			if ((pushbplug == 1)) && ((ladestatuslp1 == 0)) && ((pushbenachrichtigung == 1)) ; then
				message="Fahrzeug eingesteckt. Ladung startet bei erfüllter Ladebedingung automatisch."
				/var/www/html/openWB/runs/pushover.sh "$message"
			fi
			if ((displayconfigured == 1)) && ((displayEinBeimAnstecken == 1)) ; then
				export DISPLAY=:0 && xset dpms force on && xset dpms "$displaysleep" "$displaysleep" "$displaysleep"
			fi
			echo 20000 > /var/www/html/openWB/ramdisk/soctimer
			echo 0 > /var/www/html/openWB/ramdisk/pluggedin
		fi

		plugstat=$(<ramdisk/plugstat)
		chargestat=$(<ramdisk/chargestat)
	fi
	if [[ $evsecon == "ipevse" ]]; then
		evseplugstatelp1=$(sudo python runs/readipmodbus.py "$evseiplp1" "$evseidlp1" 1002 1)
		if [ -z "${evseplugstatelp1}" ] || ! [[ "${evseplugstatelp1}" =~ $IsNumberRegex ]]; then
			evseplugstate=$(</var/www/html/openWB/ramdisk/evseplugstate)
			openwbDebugLog "MAIN" 0 "IP EVSE read CP1 issue - using previous state '${evseplugstate}'"
		else
			echo "$evseplugstatelp1" > /var/www/html/openWB/ramdisk/evseplugstate
		fi
		ladestatuslp1=$(</var/www/html/openWB/ramdisk/ladestatus)
		if ((evseplugstatelp1 > 1)); then
			echo 1 > /var/www/html/openWB/ramdisk/plugstat
		else
			echo 0 > /var/www/html/openWB/ramdisk/plugstat
		fi
		if ((evseplugstatelp1 > 2)) && ((ladestatuslp1 == 1)) && ((lp1enabled == 1)); then
			echo 1 > /var/www/html/openWB/ramdisk/chargestat
		else
			echo 0 > /var/www/html/openWB/ramdisk/chargestat
		fi
	fi

	if ((lastmanagement == 1)); then
		ConfiguredChargePoints=2
		if [[ $evsecons1 == "modbusevse" ]]; then
			evseplugstatelp2=$(sudo python3 runs/readmodbus.py "$evsesources1" "$evseids1" 1002 1)
			if [ -z "${evseplugstatelp2}" ] || ! [[ "${evseplugstatelp2}" =~ $IsNumberRegex ]]; then
				evseplugstatelp2=$(</var/www/html/openWB/ramdisk/evseplugstatelp2)
				openwbDebugLog "MAIN" 0 "Modbus EVSE read CP2 issue - using previous state '${evseplugstatelp2}'"
			else
				echo "$evseplugstatelp2" > /var/www/html/openWB/ramdisk/evseplugstatelp2
			fi
			ladestatuss1=$(</var/www/html/openWB/ramdisk/ladestatuss1)
			if ((evseplugstatelp2 > 0)) && ((evseplugstatelp2 < 7)); then
				if ((evseplugstatelp2 > 1)); then
					plugstat2=$(</var/www/html/openWB/ramdisk/plugstats1)

					if ((plugstat2 == 0)) ; then
						if ((displayconfigured == 1)) && ((displayEinBeimAnstecken == 1)) ; then
							export DISPLAY=:0 && xset dpms force on && xset dpms "$displaysleep" "$displaysleep" "$displaysleep"
						fi
						echo 20000 > /var/www/html/openWB/ramdisk/soctimer1
					fi
					echo 1 > /var/www/html/openWB/ramdisk/plugstats1
					plugstat2=1
					plugstats1=$plugstat2
				else
					echo 0 > /var/www/html/openWB/ramdisk/plugstats1
					plugstat2=0
					plugstats1=$plugstat2
				fi
				if ((evseplugstatelp2 > 2)) && ((ladestatuss1 == 1)); then
					echo 1 > /var/www/html/openWB/ramdisk/chargestats1
				else
					echo 0 > /var/www/html/openWB/ramdisk/chargestats1
				fi

			fi
		fi
		if [[ $evsecons1 == "slaveeth" ]]; then
			evseplugstatelp2=$(sudo python runs/readslave.py 1002 1)
			if [ -z "${evseplugstatelp2}" ] || ! [[ "${evseplugstatelp2}" =~ $IsNumberRegex ]]; then
				evseplugstatelp2=$(</var/www/html/openWB/ramdisk/evseplugstatelp2)
				openwbDebugLog "MAIN" 0 "Slaveeth EVSE read CP2 issue - using previous state '${evseplugstatelp2}'"
			else
				echo "$evseplugstatelp2" > /var/www/html/openWB/ramdisk/evseplugstatelp2
			fi
			ladestatuss1=$(</var/www/html/openWB/ramdisk/ladestatuss1)

			if ((evseplugstatelp2 > 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/plugstats1
			else
				echo 0 > /var/www/html/openWB/ramdisk/plugstats1
			fi
			if ((evseplugstatelp2 > 2)) && ((ladestatuss1 == 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/chargestats1
			else
				echo 0 > /var/www/html/openWB/ramdisk/chargestats1
			fi
		fi
		if [[ $evsecons1 == "ipevse" ]]; then
			evseplugstatelp2=$(sudo python runs/readipmodbus.py "$evseiplp2" "$evseidlp2" 1002 1)
			if [ -z "${evseplugstatelp2}" ] || ! [[ "${evseplugstatelp2}" =~ $IsNumberRegex ]]; then
				evseplugstatelp2=$(</var/www/html/openWB/ramdisk/evseplugstatelp2)
				openwbDebugLog "MAIN" 0 "IP EVSE read CP2 issue - using previous state '${evseplugstatelp2}'"
			else
				echo "$evseplugstatelp2" > /var/www/html/openWB/ramdisk/evseplugstatelp2
			fi
			ladestatuslp2=$(</var/www/html/openWB/ramdisk/ladestatuss1)

			if ((evseplugstatelp2 > 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/plugstats1
			else
				echo 0 > /var/www/html/openWB/ramdisk/plugstats1
			fi
			if ((evseplugstatelp2 > 2)) && ((ladestatuslp2 == 1)) && ((lp2enabled == 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/chargestats1
			else
				echo 0 > /var/www/html/openWB/ramdisk/chargestats1
			fi
		fi
		plugstatlp2=$(<ramdisk/plugstats1)
		chargestatlp2=$(<ramdisk/chargestats1)
	else
		plugstatlp2=$(<ramdisk/plugstats1)
		chargestatlp2=$(<ramdisk/chargestats1)
		ConfiguredChargePoints=1
	fi

	if ((lastmanagements2 == 1)); then
		ConfiguredChargePoints=3
		if [[ $evsecons2 == "ipevse" ]]; then
			evseplugstatelp3=$(sudo python runs/readipmodbus.py "$evseiplp3" "$evseidlp3" 1002 1)
			if [ -z "${evseplugstatelp3}" ] || ! [[ "${evseplugstatelp3}" =~ $IsNumberRegex ]]; then
				evseplugstatelp3=$(</var/www/html/openWB/ramdisk/evseplugstatelp3)
				openwbDebugLog "MAIN" 0 "IP EVSE read CP3 issue - using previous state '${evseplugstatelp3}'"
			else
				echo "$evseplugstatelp3" > /var/www/html/openWB/ramdisk/evseplugstatelp3
			fi
			ladestatuslp3=$(</var/www/html/openWB/ramdisk/ladestatuss2)

			if ((evseplugstatelp3 > 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/plugstatlp3
			else
				echo 0 > /var/www/html/openWB/ramdisk/plugstatlp3
			fi
			if ((evseplugstatelp3 > 2)) && ((ladestatuslp3 == 1)) && ((lp3enabled == 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/chargestatlp3
			else
				echo 0 > /var/www/html/openWB/ramdisk/chargestatlp3
			fi
		fi


		if [[ $evsecons2 == "modbusevse" ]]; then
			evseplugstatelp3=$(sudo python3 runs/readmodbus.py "$evsesources2" "$evseids2" 1002 1)
			if [ -z "${evseplugstatelp3}" ] || ! [[ "${evseplugstatelp3}" =~ $IsNumberRegex ]]; then
				evseplugstatelp3=$(</var/www/html/openWB/ramdisk/evseplugstatelp3)
				openwbDebugLog "MAIN" 0 "Modbus EVSE read CP3 issue - using previous state '${evseplugstatelp3}'"
			else
				echo "$evseplugstatelp3" > /var/www/html/openWB/ramdisk/evseplugstatelp3
			fi
			ladestatuss2=$(</var/www/html/openWB/ramdisk/ladestatuss2)
			if ((evseplugstatelp3 > 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/plugstatlp3
			else
				echo 0 > /var/www/html/openWB/ramdisk/plugstatlp3
			fi
			if ((evseplugstatelp3 > 2)) && ((ladestatuss2 == 1)) ; then
				echo 1 > /var/www/html/openWB/ramdisk/chargestatlp3
			else
					echo 0 > /var/www/html/openWB/ramdisk/chargestatlp3
			fi
		fi
		plugstatlp3=$(<ramdisk/plugstatlp3)
		chargestatlp3=$(<ramdisk/chargestatlp3)
	else
		plugstatlp3=$(<ramdisk/plugstatlp3)
		chargestatlp3=$(<ramdisk/chargestatlp3)
	fi

	if ((lastmanagementlp4 == 1)); then
		ConfiguredChargePoints=4
		if [[ $evseconlp4 == "ipevse" ]]; then
			evseplugstatelp4=$(sudo python runs/readipmodbus.py "$evseiplp4" "$evseidlp4" 1002 1)
			if [ -z "${evseplugstatelp4}" ] || ! [[ "${evseplugstatelp4}" =~ $IsNumberRegex ]]; then
				# EVSE read returned empty or non-numeric value --> use last state for this loop
				evseplugstatelp4=$(</var/www/html/openWB/ramdisk/evseplugstatelp4)
				openwbDebugLog "MAIN" 0 "IP EVSE read CP4 issue - using previous state '${evseplugstatelp4}'"
			else
				echo "$evseplugstatelp4" > /var/www/html/openWB/ramdisk/evseplugstatelp4
			fi
			ladestatuslp4=$(</var/www/html/openWB/ramdisk/ladestatuslp4)

			if ((evseplugstatelp4 > 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/plugstatlp4
			else
				echo 0 > /var/www/html/openWB/ramdisk/plugstatlp4
			fi
			if ((evseplugstatelp4 > 2)) && ((ladestatuslp4 == 1)) && ((lp4enabled == 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/chargestatlp4
			else
				echo 0 > /var/www/html/openWB/ramdisk/chargestatlp4
			fi
		fi
	fi

	if ((lastmanagementlp5 == 1)); then
		ConfiguredChargePoints=5
		if [[ $evseconlp5 == "ipevse" ]]; then
			evseplugstatelp5=$(sudo python runs/readipmodbus.py "$evseiplp5" "$evseidlp5" 1002 1)
			if [ -z "${evseplugstatelp5}" ] || ! [[ "${evseplugstatelp5}" =~ $IsNumberRegex ]]; then
				# EVSE read returned empty or non-numeric value --> use last state for this loop
				evseplugstatelp5=$(</var/www/html/openWB/ramdisk/evseplugstatelp5)
				openwbDebugLog "MAIN" 0 "IP EVSE read CP5 issue - using previous state '${evseplugstatelp5}'"
			else
				echo "$evseplugstatelp5" > /var/www/html/openWB/ramdisk/evseplugstatelp5
			fi
			ladestatuslp5=$(</var/www/html/openWB/ramdisk/ladestatuslp5)

			if ((evseplugstatelp5 > 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/plugstatlp5
			else
				echo 0 > /var/www/html/openWB/ramdisk/plugstatlp5
			fi
			if ((evseplugstatelp5 > 2)) && ((ladestatuslp5 == 1)) && ((lp5enabled == 1)) ; then
				echo 1 > /var/www/html/openWB/ramdisk/chargestatlp5
			else
				echo 0 > /var/www/html/openWB/ramdisk/chargestatlp5
			fi
		fi
	fi

	if ((lastmanagementlp6 == 1)); then
		ConfiguredChargePoints=6
		if [[ $evseconlp6 == "ipevse" ]]; then
			evseplugstatelp6=$(sudo python runs/readipmodbus.py "$evseiplp6" "$evseidlp6" 1002 1)
			if [ -z "${evseplugstatelp6}" ] || ! [[ "${evseplugstatelp6}" =~ $IsNumberRegex ]]; then
				# EVSE read returned empty or non-numeric value --> use last state for this loop
				evseplugstatelp6=$(</var/www/html/openWB/ramdisk/evseplugstatelp6)
				openwbDebugLog "MAIN" 0 "IP EVSE read CP6 issue - using previous state '${evseplugstatelp6}'"
			else
				echo "$evseplugstatelp6" > /var/www/html/openWB/ramdisk/evseplugstatelp6
			fi
			ladestatuslp6=$(</var/www/html/openWB/ramdisk/ladestatuslp6)

			if ((evseplugstatelp6 > 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/plugstatlp6
			else
				echo 0 > /var/www/html/openWB/ramdisk/plugstatlp6
			fi
			if ((evseplugstatelp6 > 2)) && ((ladestatuslp6 == 1)) && ((lp6enabled == 1)) ; then
				echo 1 > /var/www/html/openWB/ramdisk/chargestatlp6
			else
				echo 0 > /var/www/html/openWB/ramdisk/chargestatlp6
			fi
		fi
	fi

	if ((lastmanagementlp7 == 1)); then
		ConfiguredChargePoints=7
		if [[ $evseconlp7 == "ipevse" ]]; then
			evseplugstatelp7=$(sudo python runs/readipmodbus.py "$evseiplp7" "$evseidlp7" 1002 1)
			if [ -z "${evseplugstatelp7}" ] || ! [[ "${evseplugstatelp7}" =~ $IsNumberRegex ]]; then
				# EVSE read returned empty or non-numeric value --> use last state for this loop
				evseplugstatelp7=$(</var/www/html/openWB/ramdisk/evseplugstatelp7)
				openwbDebugLog "MAIN" 0 "IP EVSE read CP7 issue - using previous state '${evseplugstatelp7}'"
			else
				echo "$evseplugstatelp7" > /var/www/html/openWB/ramdisk/evseplugstatelp7
			fi
			ladestatuslp7=$(</var/www/html/openWB/ramdisk/ladestatuslp7)

			if ((evseplugstatelp7 > 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/plugstatlp7
			else
				echo 0 > /var/www/html/openWB/ramdisk/plugstatlp7
			fi
			if ((evseplugstatelp7 > 2)) && ((ladestatuslp7 == 1)) && ((lp7enabled == 1)) ; then
				echo 1 > /var/www/html/openWB/ramdisk/chargestatlp7
			else
				echo 0 > /var/www/html/openWB/ramdisk/chargestatlp7
			fi
		fi
	fi

	if ((lastmanagementlp8 == 1)); then
		ConfiguredChargePoints=8
		if [[ $evseconlp8 == "ipevse" ]]; then
			evseplugstatelp8=$(sudo python runs/readipmodbus.py "$evseiplp8" "$evseidlp8" 1002 1)
			if [ -z "${evseplugstatelp8}" ] || ! [[ "${evseplugstatelp8}" =~ $IsNumberRegex ]]; then
				# EVSE read returned empty or non-numeric value --> use last state for this loop
				evseplugstatelp4=$(</var/www/html/openWB/ramdisk/evseplugstatelp8)
				openwbDebugLog "MAIN" 0 "IP EVSE read CP8 issue - using previous state '${evseplugstatelp8}'"
			else
				echo "$evseplugstatelp8" > /var/www/html/openWB/ramdisk/evseplugstatelp8
			fi
			ladestatuslp8=$(</var/www/html/openWB/ramdisk/ladestatuslp8)

			if ((evseplugstatelp8 > 1)); then
				echo 1 > /var/www/html/openWB/ramdisk/plugstatlp8
			else
				echo 0 > /var/www/html/openWB/ramdisk/plugstatlp8
			fi
			if ((evseplugstatelp8 > 2)) && ((ladestatuslp8 == 1)) && ((lp8enabled == 1)) ; then
				echo 1 > /var/www/html/openWB/ramdisk/chargestatlp8
			else
				echo 0 > /var/www/html/openWB/ramdisk/chargestatlp8
			fi
		fi
	fi

	echo $ConfiguredChargePoints > ramdisk/ConfiguredChargePoints
	# Lastmanagement var check age
	if test $(find "ramdisk/lastregelungaktiv" -mmin +2); then
		echo " " > ramdisk/lastregelungaktiv
	fi

	# Werte für die Berechnung ermitteln
	lademodus=$(</var/www/html/openWB/ramdisk/lademodus)
	if [ -z "$lademodus" ] ; then
		mosquitto_pub -r -t "openWB/set/ChargeMode" -m "$bootmodus"
		lademodus=$bootmodus
	fi
	llalt=$(cat /var/www/html/openWB/ramdisk/llsoll)
	llaltlp1=$llalt

	#PV Leistung ermitteln
	# pv1watt Leistung WR1
	# pv2watt Leistung WR2
	# pvwatt gesamtleistung WR1 und WR2
	# pvallwatt gleich zu pvwatt
	# pv Counter
	# pvkwh zaehler wr1
	# pv2kwh zaehler wr2
	# pvallwh summe von pvkwh und pv2kwh (wird in cron5 und cronnighly verwendet)
	if [[ $pvwattmodul != "none" ]]; then
		pv1vorhanden="1"
		echo 1 > /var/www/html/openWB/ramdisk/pv1vorhanden
		pvwatt=$("modules/$pvwattmodul/main.sh" || true)
		if ! [[ $pvwatt =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für pvwatt: $pvwatt"
			pvwatt="0"
		fi
		pv1watt=$pvwatt
		echo "$pv1watt" > ramdisk/pv1watt
	else
		pv1vorhanden="0"
		echo 0 > /var/www/html/openWB/ramdisk/pv1vorhanden
		pvwatt=$(</var/www/html/openWB/ramdisk/pvwatt)
	fi
	if [[ $pv2wattmodul != "none" ]]; then
		pv2vorhanden="1"
		echo 1 > /var/www/html/openWB/ramdisk/pv2vorhanden
		pv2watt=$("modules/$pv2wattmodul/main.sh" || true)
		if ! [[ $pv2watt =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für pv2watt: $pv2watt"
			pv2watt="0"
		fi
		echo $pv2watt > ramdisk/pv2watt
		pvwatt=$((pvwatt + pv2watt))
		if ! [[ $pvwatt =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für PV Gesamtleistung: $pvwatt"
			pvwatt="0"
		fi
		echo "$pvwatt" > /var/www/html/openWB/ramdisk/pvallwatt
		pvkwh=$(</var/www/html/openWB/ramdisk/pvkwh)
		pv2kwh=$(</var/www/html/openWB/ramdisk/pv2kwh)
		pvallwh=$(echo "$pvkwh + $pv2kwh" |bc)
		echo "$pvallwh" > /var/www/html/openWB/ramdisk/pvallwh
	else
		pvkwh=$(</var/www/html/openWB/ramdisk/pvkwh)
		pv2vorhanden="0"
		echo 0 > /var/www/html/openWB/ramdisk/pv2vorhanden
		echo "$pvkwh" > /var/www/html/openWB/ramdisk/pvallwh
		echo "$pvwatt" > /var/www/html/openWB/ramdisk/pvallwatt
	fi

	#Speicher werte
	if [[ $speichermodul != "none" ]] ; then
		timeout 5 "modules/$speichermodul/main.sh"
		if [[ $? -eq 124 ]] ; then
			openwbModulePublishState "BAT" 2 "Die Werte konnten nicht innerhalb des Timeouts abgefragt werden. Bitte Konfiguration und Gerätestatus prüfen."
		else
			openwbModulePublishState "BAT" 0 ""
		fi
		speicherleistung=$(</var/www/html/openWB/ramdisk/speicherleistung)
		speicherleistung=${speicherleistung//.*/}
		speichersoc=$(</var/www/html/openWB/ramdisk/speichersoc)
		speichersoc=${speichersoc//.*/}
		speichervorhanden="1"
		echo 1 > /var/www/html/openWB/ramdisk/speichervorhanden
		if [[ $speichermodul == "speicher_e3dc" ]] ; then
			pvwatt=$(</var/www/html/openWB/ramdisk/pvwatt)
			echo 1 > /var/www/html/openWB/ramdisk/pv1vorhanden
			pv1vorhanden="1"
			echo "$pvwatt" > ramdisk/pv1watt
		fi
	else
		speichervorhanden="0"
		echo 0 > /var/www/html/openWB/ramdisk/speichervorhanden
	fi
	#addition pv nach Speicherauslesung
	if ((pv2vorhanden == 1)); then
		pv1watt=$(</var/www/html/openWB/ramdisk/pv1watt)
		pv2watt=$(</var/www/html/openWB/ramdisk/pv2watt)
		pvwatt=$((pv1watt + pv2watt))
		echo "$pvwatt" > /var/www/html/openWB/ramdisk/pvallwatt
		echo "$pvwatt" > /var/www/html/openWB/ramdisk/pvwatt
	else
		if ((pv1vorhanden == 1)); then
			pv1watt=$(</var/www/html/openWB/ramdisk/pv1watt)
			pvwatt=$pv1watt
			echo "$pvwatt" > /var/www/html/openWB/ramdisk/pvallwatt
			echo "$pvwatt" > /var/www/html/openWB/ramdisk/pvwatt
		fi
	fi

	llphaset=3

	#Ladeleistung ermitteln
	if [[ $ladeleistungmodul != "none" ]]; then
		timeout 10 "modules/$ladeleistungmodul/main.sh" || true
		llkwh=$(</var/www/html/openWB/ramdisk/llkwh)
		llkwhges=$llkwh
		lla1=$(cat /var/www/html/openWB/ramdisk/lla1)
		lla2=$(cat /var/www/html/openWB/ramdisk/lla2)
		lla3=$(cat /var/www/html/openWB/ramdisk/lla3)
		lla1=${lla1//.*/}
		lla2=${lla2//.*/}
		lla3=${lla3//.*/}
		llv1=$(cat /var/www/html/openWB/ramdisk/llv1)
		llv2=$(cat /var/www/html/openWB/ramdisk/llv2)
		llv3=$(cat /var/www/html/openWB/ramdisk/llv3)
		ladeleistung=$(cat /var/www/html/openWB/ramdisk/llaktuell)
		ladeleistunglp1=$ladeleistung
		if ! [[ $lla1 =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für lla1: $lla1"
			lla1="0"
		fi
		if ! [[ $lla2 =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für lla2: $lla2"
			lla2="0"
		fi

		if ! [[ $lla3 =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für lla3: $lla3"
			lla3="0"
		fi

		lp1phasen=0
		if ((lla1 >= llphaset)); then
			((lp1phasen++))
		fi
		if ((lla2 >= llphaset)); then
			((lp1phasen++))
		fi
		if ((lla3 >= llphaset)); then
			((lp1phasen++))
		fi
		echo "$lp1phasen" > /var/www/html/openWB/ramdisk/lp1phasen
		if ! [[ $ladeleistung =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für ladeleistung: $ladeleistung"
			ladeleistung="0"
		fi
		ladestatus=$(</var/www/html/openWB/ramdisk/ladestatus)

	else
		lla1=0
		lla2=0
		lla3=0
		ladeleistung=0
		llkwh=0
		llkwhges=$llkwh
	fi

	#zweiter ladepunkt
	if ((lastmanagement == 1)); then
		if [[ $socmodul1 != "none" ]]; then
			run_soc_module "$socmodul1"
			soc1=$(</var/www/html/openWB/ramdisk/soc1)
			tmpsoc1=$(</var/www/html/openWB/ramdisk/tmpsoc1)
			if ! [[ $soc1 =~ $re ]] ; then
				openwbDebugLog "MAIN" 0 "ungültiger Wert für soc1: $soc1"
				soc1=$tmpsoc1
			else
				echo "$soc1" > /var/www/html/openWB/ramdisk/tmpsoc1
			fi
			soc1vorhanden=1
			echo 1 > /var/www/html/openWB/ramdisk/soc1vorhanden
		else
			echo 0 > /var/www/html/openWB/ramdisk/soc1vorhanden
			soc1=0
			soc1vorhanden=0
		fi
		timeout 10 "modules/$ladeleistungs1modul/main.sh" || true
		llkwhs1=$(</var/www/html/openWB/ramdisk/llkwhs1)
		llkwhges=$(echo "$llkwhges + $llkwhs1" |bc)
		llalts1=$(cat /var/www/html/openWB/ramdisk/llsolls1)
		ladeleistungs1=$(cat /var/www/html/openWB/ramdisk/llaktuells1)
		ladeleistunglp2=$ladeleistungs1
		llas11=$(cat /var/www/html/openWB/ramdisk/llas11)
		llas12=$(cat /var/www/html/openWB/ramdisk/llas12)
		llas13=$(cat /var/www/html/openWB/ramdisk/llas13)
		llas11=${llas11//.*/}
		llas12=${llas12//.*/}
		llas13=${llas13//.*/}
		ladestatuss1=$(</var/www/html/openWB/ramdisk/ladestatuss1)
		if ! [[ $ladeleistungs1 =~ $re ]] ; then
			ladeleistungs1="0"
		fi
		ladeleistung=$((ladeleistung + ladeleistungs1))
		echo "$ladeleistung" > /var/www/html/openWB/ramdisk/llkombiniert
		lp2phasen=0
		if ((llas11 >= llphaset)); then
			((lp2phasen++))
		fi
		if ((llas12 >= llphaset)); then
			((lp2phasen++))
		fi
		if ((llas13 >= llphaset)); then
			((lp2phasen++))
		fi
		echo "$lp2phasen" > /var/www/html/openWB/ramdisk/lp2phasen
	else
		echo "$ladeleistung" > /var/www/html/openWB/ramdisk/llkombiniert
		ladeleistunglp2=0
		soc1vorhanden=0
	fi

	#dritter ladepunkt
	if ((lastmanagements2 == 1)); then
		timeout 10 "modules/$ladeleistungs2modul/main.sh" || true
		llkwhs2=$(</var/www/html/openWB/ramdisk/llkwhs2)
		llkwhges=$(echo "$llkwhges + $llkwhs2" |bc)
		llalts2=$(cat /var/www/html/openWB/ramdisk/llsolls2)
		ladeleistungs2=$(cat /var/www/html/openWB/ramdisk/llaktuells2)
		ladeleistunglp3=$ladeleistungs2
		llas21=$(cat /var/www/html/openWB/ramdisk/llas21)
		llas22=$(cat /var/www/html/openWB/ramdisk/llas22)
		llas23=$(cat /var/www/html/openWB/ramdisk/llas23)
		llas21=${llas21//.*/}
		llas22=${llas22//.*/}
		llas23=${llas23//.*/}
		lp3phasen=0
		if ((llas21 >= llphaset)); then
			((lp3phasen++))
		fi
		if ((llas22 >= llphaset)); then
			((lp3phasen++))
		fi
		if ((llas23 >= llphaset)); then
			((lp3phasen++))
		fi
		echo "$lp3phasen" > /var/www/html/openWB/ramdisk/lp3phasen
		ladestatuss2=$(</var/www/html/openWB/ramdisk/ladestatuss2)
		if ! [[ $ladeleistungs2 =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für ladeleistungs2: $ladeleistungs2"
			ladeleistungs2="0"
		fi
		ladeleistung=$((ladeleistung + ladeleistungs2))
		echo "$ladeleistung" > /var/www/html/openWB/ramdisk/llkombiniert
	else
		echo "$ladeleistung" > /var/www/html/openWB/ramdisk/llkombiniert
		ladeleistungs2="0"
		ladeleistunglp3=0
	fi

	#vierter ladepunkt
	if ((lastmanagementlp4 == 1)); then
		if [[ "$evseconlp4" == "extopenwb" ]]; then
			timeout 3 modules/extopenwb/main.sh 4 "$chargep4ip" "$chargep4cp" || true
		elif [[ "$evseconlp4" == "owbpro" ]]; then
			timeout 3 modules/owbpro/main.sh 4 "$owbpro4ip" || true
		else
			timeout 3 modules/mpm3pmlllp4/main.sh || true
		fi
		llkwhlp4=$(</var/www/html/openWB/ramdisk/llkwhlp4)
		llkwhges=$(echo "$llkwhges + $llkwhlp4" |bc)
		llaltlp4=$(cat /var/www/html/openWB/ramdisk/llsolllp4)
		ladeleistunglp4=$(cat /var/www/html/openWB/ramdisk/llaktuelllp4)
		lla1lp4=$(cat /var/www/html/openWB/ramdisk/lla1lp4)
		lla2lp4=$(cat /var/www/html/openWB/ramdisk/lla2lp4)
		lla3lp4=$(cat /var/www/html/openWB/ramdisk/lla3lp4)
		lla1lp4=${lla1lp4//.*/}
		lla2lp4=${lla2lp4//.*/}
		lla3lp4=${lla3lp4//.*/}
		lp4phasen=0
		if ((lla1lp4 >= llphaset)); then
			((lp4phasen++))
		fi
		if ((lla2lp4 >= llphaset)); then
			((lp4phasen++))
		fi
		if ((lla3lp4 >= llphaset)); then
			((lp4phasen++))
		fi
		echo "$lp4phasen" > /var/www/html/openWB/ramdisk/lp4phasen
		ladestatuslp4=$(</var/www/html/openWB/ramdisk/ladestatuslp4)
		if ! [[ $ladeleistunglp4 =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für ladeleistunglp4: $ladeleistunglp4"
			ladeleistunglp4="0"
		fi
		ladeleistung=$((ladeleistung + ladeleistunglp4))
	else
		ladeleistunglp4=0
	fi

	#fünfter ladepunkt
	if ((lastmanagementlp5 == 1)); then
		if [[ "$evseconlp5" == "extopenwb" ]]; then
			timeout 3 modules/extopenwb/main.sh 5 "$chargep5ip" "$chargep5cp" || true
		elif [[ "$evseconlp5" == "owbpro" ]]; then
			timeout 3 modules/owbpro/main.sh 5 "$owbpro5ip" || true
		else
			timeout 3 modules/mpm3pmlllp5/main.sh || true
		fi
		llkwhlp5=$(</var/www/html/openWB/ramdisk/llkwhlp5)
		llkwhges=$(echo "$llkwhges + $llkwhlp5" |bc)
		llaltlp5=$(cat /var/www/html/openWB/ramdisk/llsolllp5)
		ladeleistunglp5=$(cat /var/www/html/openWB/ramdisk/llaktuelllp5)
		lla1lp5=$(cat /var/www/html/openWB/ramdisk/lla1lp5)
		lla2lp5=$(cat /var/www/html/openWB/ramdisk/lla2lp5)
		lla3lp5=$(cat /var/www/html/openWB/ramdisk/lla3lp5)
		lla1lp5=${lla1lp5//.*/}
		lla2lp5=${lla2lp5//.*/}
		lla3lp5=${lla3lp5//.*/}
		lp5phasen=0
		if ((lla1lp5 >= llphaset)); then
			((lp5phasen++))
		fi
		if ((lla2lp5 >= llphaset)); then
			((lp5phasen++))
		fi
		if ((lla3lp5 >= llphaset)); then
			((lp5phasen++))
		fi
		echo "$lp5phasen" > /var/www/html/openWB/ramdisk/lp5phasen
		ladestatuslp5=$(</var/www/html/openWB/ramdisk/ladestatuslp5)
		if ! [[ $ladeleistunglp5 =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für ladeleistunglp5: $ladeleistunglp5"
			ladeleistunglp5="0"
		fi
		ladeleistung=$((ladeleistung + ladeleistunglp5))
	else
		ladeleistunglp5=0
	fi

	#sechster ladepunkt
	if ((lastmanagementlp6 == 1)); then
		if [[ "$evseconlp6" == "extopenwb" ]]; then
			timeout 3 modules/extopenwb/main.sh 6 "$chargep6ip" "$chargep6cp" || true
		elif [[ "$evseconlp6" == "owbpro" ]]; then
			timeout 3 modules/owbpro/main.sh 6 "$owbpro6ip" || true
		else
			timeout 3 modules/mpm3pmlllp6/main.sh || true
		fi
		llkwhlp6=$(</var/www/html/openWB/ramdisk/llkwhlp6)
		llkwhges=$(echo "$llkwhges + $llkwhlp6" |bc)
		llaltlp6=$(cat /var/www/html/openWB/ramdisk/llsolllp6)
		ladeleistunglp6=$(cat /var/www/html/openWB/ramdisk/llaktuelllp6)
		lla1lp6=$(cat /var/www/html/openWB/ramdisk/lla1lp6)
		lla2lp6=$(cat /var/www/html/openWB/ramdisk/lla2lp6)
		lla3lp6=$(cat /var/www/html/openWB/ramdisk/lla3lp6)
		lla1lp6=${lla1lp6//.*/}
		lla2lp6=${lla2lp6//.*/}
		lla3lp6=${lla3lp6//.*/}
		lp6phasen=0
		if ((lla1lp6 >= llphaset)); then
			((lp6phasen++))
		fi
		if ((lla2lp6 >= llphaset)); then
			((lp6phasen++))
		fi
		if ((lla3lp6 >= llphaset)); then
			((lp6phasen++))
		fi
		echo "$lp6phasen" > /var/www/html/openWB/ramdisk/lp6phasen
		ladestatuslp6=$(</var/www/html/openWB/ramdisk/ladestatuslp6)
		if ! [[ $ladeleistunglp6 =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für ladeleistunglp6: $ladeleistunglp6"
			ladeleistunglp6="0"
		fi
		ladeleistung=$((ladeleistung + ladeleistunglp6))
	else
		ladeleistunglp6=0
	fi

	#siebter ladepunkt
	if ((lastmanagementlp7 == 1)); then
		if [[ "$evseconlp7" == "extopenwb" ]]; then
			timeout 3 modules/extopenwb/main.sh 7 "$chargep7ip" "$chargep7cp" || true
		elif [[ "$evseconlp7" == "owbpro" ]]; then
			timeout 3 modules/owbpro/main.sh 7 "$owbpro7ip" || true
		else
			timeout 3 modules/mpm3pmlllp7/main.sh || true
		fi
		llkwhlp7=$(</var/www/html/openWB/ramdisk/llkwhlp7)
		llkwhges=$(echo "$llkwhges + $llkwhlp7" |bc)
		llaltlp7=$(cat /var/www/html/openWB/ramdisk/llsolllp7)
		ladeleistunglp7=$(cat /var/www/html/openWB/ramdisk/llaktuelllp7)
		lla1lp7=$(cat /var/www/html/openWB/ramdisk/lla1lp7)
		lla2lp7=$(cat /var/www/html/openWB/ramdisk/lla2lp7)
		lla3lp7=$(cat /var/www/html/openWB/ramdisk/lla3lp7)
		lla1lp7=${lla1lp7//.*/}
		lla2lp7=${lla2lp7//.*/}
		lla3lp7=${lla3lp7//.*/}
		ladestatuslp7=$(</var/www/html/openWB/ramdisk/ladestatuslp7)
		if ! [[ $ladeleistunglp7 =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für ladeleistunglp7: $ladeleistunglp7"
			ladeleistunglp7="0"
		fi
		ladeleistung=$((ladeleistung + ladeleistunglp7))
		lp7phasen=0
		if ((lla1lp7 >= llphaset)); then
			((lp7phasen++))
		fi
		if ((lla2lp7 >= llphaset)); then
			((lp7phasen++))
		fi
		if ((lla3lp7 >= llphaset)); then
			((lp7phasen++))
		fi
		echo "$lp7phasen" > /var/www/html/openWB/ramdisk/lp7phasen
	else
		ladeleistunglp7=0
	fi
	#achter ladepunkt
	if ((lastmanagementlp8 == 1)); then
		if [[ "$evseconlp8" == "extopenwb" ]]; then
			timeout 3 modules/extopenwb/main.sh 8 "$chargep8ip" "$chargep8cp" || true
		elif [[ "$evseconlp8" == "owbpro" ]]; then
			timeout 3 modules/owbpro/main.sh 8 "$owbpro8ip" || true
		else
			timeout 3 modules/mpm3pmlllp8/main.sh || true
		fi

		llkwhlp8=$(</var/www/html/openWB/ramdisk/llkwhlp8)
		llkwhges=$(echo "$llkwhges + $llkwhlp8" |bc)
		llaltlp8=$(cat /var/www/html/openWB/ramdisk/llsolllp8)
		ladeleistunglp8=$(cat /var/www/html/openWB/ramdisk/llaktuelllp8)
		lla1lp8=$(cat /var/www/html/openWB/ramdisk/lla1lp8)
		lla2lp8=$(cat /var/www/html/openWB/ramdisk/lla2lp8)
		lla3lp8=$(cat /var/www/html/openWB/ramdisk/lla3lp8)
		lla1lp8=${lla1lp8//.*/}
		lla2lp8=${lla2lp8//.*/}
		lla3lp8=${lla3lp8//.*/}
		lp8phasen=0
		if ((lla1lp8 >= llphaset)); then
			((lp8phasen++))
		fi
		if ((lla2lp8 >= llphaset)); then
			((lp8phasen++))
		fi
		if ((lla3lp8 >= llphaset)); then
			((lp8phasen++))
		fi
		echo "$lp8phasen" > /var/www/html/openWB/ramdisk/lp8phasen
		ladestatuslp8=$(</var/www/html/openWB/ramdisk/ladestatuslp8)
		if ! [[ $ladeleistunglp8 =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für ladeleistunglp8: $ladeleistunglp8"
			ladeleistunglp8="0"
		fi
		ladeleistung=$((ladeleistung + ladeleistunglp8))
	else
		ladeleistunglp8=0
	fi

	echo "$ladeleistung" > /var/www/html/openWB/ramdisk/llkombiniert
	echo "$llkwhges" > ramdisk/llkwhges

	#Schuko-Steckdose an openWB
	if ((standardSocketInstalled == 1)); then

		timeout 10 modules/sdm120modbusSocket/main.sh || true
		socketkwh=$(</var/www/html/openWB/ramdisk/socketkwh)
		socketp=$(cat /var/www/html/openWB/ramdisk/socketp)
		socketa=$(cat /var/www/html/openWB/ramdisk/socketa)
		socketa=${socketa//.*/}
		socketv=$(cat /var/www/html/openWB/ramdisk/socketv)
		if ! [[ $socketa =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für socketa: $socketa"
			socketa="0"
		fi
	fi

	#Wattbezug
	if [[ $wattbezugmodul != "none" ]]; then
		wattbezug=$("modules/$wattbezugmodul/main.sh" || true)
		if ! [[ $wattbezug =~ $re ]] ; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für wattbezug: $wattbezug"
			wattbezug="0"
		fi
		wattbezugint=$(printf "%.0f\n" $wattbezug)
		#evu glaettung
		if ((evuglaettungakt == 1)); then
			if ((evuglaettung > 20)); then
				ganzahl=$((evuglaettung / 10))
				for ((i=ganzahl;i>=1;i--)); do
					i2=$((i + 1))
					cp "ramdisk/glaettung$i" "ramdisk/glaettung$i2"
				done
				echo "$wattbezug" > ramdisk/glaettung1
				for ((i=1;i<=ganzahl;i++)); do
					glaettung=$(<"ramdisk/glaettung$i")
					glaettungw=$((glaettung + glaettungw))
				done
				glaettungfinal=$((glaettungw / ganzahl))
				echo "$glaettungfinal" > ramdisk/glattwattbezug
				wattbezug=$glaettungfinal
			fi
		fi
		#uberschuss zur berechnung
		uberschuss=$(printf "%.0f\n" $((-wattbezug)))
		if ((speichervorhanden == 1)); then
			if ((speicherpveinbeziehen == 1)); then
				if ((speicherleistung > 0)); then
					if ((speichersoc > speichersocnurpv)); then
						speicherww=$((speicherleistung + speicherwattnurpv))
						uberschuss=$((uberschuss + speicherww))
					else
						speicherww=$((speicherleistung - speichermaxwatt))
						uberschuss=$((uberschuss + speicherww))
					fi
				fi
			fi
		fi
		evua1=$(cat /var/www/html/openWB/ramdisk/bezuga1)
		evua2=$(cat /var/www/html/openWB/ramdisk/bezuga2)
		evua3=$(cat /var/www/html/openWB/ramdisk/bezuga3)
		evua1=${evua1//.*/}
		evua2=${evua2//.*/}
		evua3=${evua3//.*/}
		if ! [[ $evua1 =~ $re ]]; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für evua1: $evua1"
			evua1="0"
		fi
		if ! [[ $evua2 =~ $re ]]; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für evua2: $evua2"
			evua2="0"
		fi
		if ! [[ $evua3 =~ $re ]]; then
			openwbDebugLog "MAIN" 0 "ungültiger Wert für evua3: $evua3"
			evua3="0"
		fi
		evuas=("$evua1" "$evua2" "$evua3")
		maxevu=${evuas[0]}
		lowevu=${evuas[0]}
		for v in "${evuas[@]}"; do
			if ((v < lowevu)); then lowevu=$v; fi;
			if ((v > maxevu)); then maxevu=$v; fi;
		done
		schieflast=$((maxevu - lowevu))
		echo $schieflast > /var/www/html/openWB/ramdisk/schieflast
	else
		uberschuss=$((-pvwatt - hausbezugnone - ladeleistung))
		echo $((-uberschuss)) > /var/www/html/openWB/ramdisk/wattbezug
		wattbezugint=$((-uberschuss))
		wattbezug=$wattbezugint
	fi

	# Abschaltbare Smartdevices zum Ueberschuss rechnen
	echo $uberschuss > /var/www/html/openWB/ramdisk/ueberschuss_org
	wattabs=$(cat /var/www/html/openWB/ramdisk/devicetotal_watt)
	uberschuss=$((uberschuss + wattabs))
	echo $uberschuss > /var/www/html/openWB/ramdisk/ueberschuss_mitsmart

	#Soc ermitteln
	if [[ "$socmodul" != "none" ]]; then
		socvorhanden=1
		echo 1 > /var/www/html/openWB/ramdisk/socvorhanden
		if ((stopsocnotpluggedlp1 == 1)); then
			soctimer=$(</var/www/html/openWB/ramdisk/soctimer)
			if ((plugstat == 1)) || ((soctimer == 20005)); then # force soc update button sends 20005
				"modules/$socmodul/main.sh" &
				soc=$(</var/www/html/openWB/ramdisk/soc)
				tmpsoc=$(</var/www/html/openWB/ramdisk/tmpsoc)
				if ! [[ $soc =~ $re ]] ; then
					openwbDebugLog "MAIN" 0 "ungültiger Wert für soc: $soc"
					soc=$tmpsoc
				else
					echo "$soc" > /var/www/html/openWB/ramdisk/tmpsoc
				fi
			else
				echo 600 > /var/www/html/openWB/ramdisk/soctimer
				soc=$(</var/www/html/openWB/ramdisk/soc)
			fi
		else
			"modules/$socmodul/main.sh" &
			soc=$(</var/www/html/openWB/ramdisk/soc)
			tmpsoc=$(</var/www/html/openWB/ramdisk/tmpsoc)
			if ! [[ $soc =~ $re ]] ; then
				openwbDebugLog "MAIN" 0 "ungültiger Wert für soc: $soc"
				soc=$tmpsoc
			else
				echo "$soc" > /var/www/html/openWB/ramdisk/tmpsoc
			fi
		fi
	else
		socvorhanden=0
		echo 0 > /var/www/html/openWB/ramdisk/socvorhanden
		soc=0
	fi

	if [ -s "ramdisk/device1_watt" ]; then shd1_w=$(<ramdisk/device1_watt); else shd1_w=0; fi
	if [ -s "ramdisk/device2_watt" ]; then shd2_w=$(<ramdisk/device2_watt); else shd2_w=0; fi
	if [ -s "ramdisk/device3_watt" ]; then shd3_w=$(<ramdisk/device3_watt); else shd3_w=0; fi
	if [ -s "ramdisk/device4_watt" ]; then shd4_w=$(<ramdisk/device4_watt); else shd4_w=0; fi
	if [ -s "ramdisk/device5_watt" ]; then shd5_w=$(<ramdisk/device5_watt); else shd5_w=0; fi
	if [ -s "ramdisk/device6_watt" ]; then shd6_w=$(<ramdisk/device6_watt); else shd6_w=0; fi
	if [ -s "ramdisk/device7_watt" ]; then shd7_w=$(<ramdisk/device7_watt); else shd7_w=0; fi
	if [ -s "ramdisk/device8_watt" ]; then shd8_w=$(<ramdisk/device8_watt); else shd8_w=0; fi
	if [ -s "ramdisk/device9_watt" ]; then shd9_w=$(<ramdisk/device9_watt); else shd9_w=0; fi
	if [ -s "ramdisk/devicetotal_watt_hausmin" ]; then shdall_w=$(<ramdisk/devicetotal_watt_hausmin); else shdall_w=0; fi
	if [ -s "ramdisk/device1_temp0" ]; then shd1_t0=$(<ramdisk/device1_temp0); else shd1_t0=0; fi
	if [ -s "ramdisk/device1_temp1" ]; then shd1_t1=$(<ramdisk/device1_temp1); else shd1_t1=0; fi
	if [ -s "ramdisk/device1_temp2" ]; then shd1_t2=$(<ramdisk/device1_temp2); else shd1_t2=0; fi
	if [ -s "ramdisk/verbraucher1_watt" ]; then verb1_w=$(<ramdisk/verbraucher1_watt); else verb1_w=0; fi
	verb1_w=$(printf "%.0f\n" $verb1_w)
	if [ -s "ramdisk/verbraucher2_watt" ]; then verb2_w=$(<ramdisk/verbraucher2_watt); else verb2_w=0; fi
	verb2_w=$(printf "%.0f\n" $verb2_w)
	if [ -s "ramdisk/verbraucher3_watt" ]; then verb3_w=$(<ramdisk/verbraucher3_watt); else verb3_w=0; fi
	verb3_w=$(printf "%.0f\n" $verb3_w)

	#hausverbrauch=$((wattbezugint - pvwatt - ladeleistung - speicherleistung - shd1_w - shd2_w - shd3_w - shd4_w - shd5_w - shd6_w - shd7_w - shd8_w - shd9_w - verb1_w - verb2_w - verb3_w))
	hausverbrauch=$((wattbezugint - pvwatt - ladeleistung - speicherleistung - shdall_w - verb1_w - verb2_w - verb3_w))
	if ((hausverbrauch < 0)); then
		if [ -f /var/www/html/openWB/ramdisk/hausverbrauch.invalid ]; then
			hausverbrauchinvalid=$(</var/www/html/openWB/ramdisk/hausverbrauch.invalid)
			((hausverbrauchinvalid++))
		else
			hausverbrauchinvalid=1
		fi
		echo "$hausverbrauchinvalid" > /var/www/html/openWB/ramdisk/hausverbrauch.invalid
		if ((hausverbrauchinvalid < 3)); then
			hausverbrauch=$(</var/www/html/openWB/ramdisk/hausverbrauch)
		else
			hausverbrauch=0
		fi
	else
		echo "0" > /var/www/html/openWB/ramdisk/hausverbrauch.invalid
	fi
	echo $hausverbrauch > /var/www/html/openWB/ramdisk/hausverbrauch
	usesimbezug=0
	if [[ $wattbezugmodul == "bezug_rct" ]]|| [[ $wattbezugmodul == "bezug_kostalplenticoreem300haus" ]]  ; then
		usesimbezug=1
	fi
	if ((usesimbezug == 1)); then
		ra='^-?[0-9]+$'
		watt2=$(</var/www/html/openWB/ramdisk/wattbezug)
		if [[ -e /var/www/html/openWB/ramdisk/bezugwatt0pos ]]; then
			importtemp=$(</var/www/html/openWB/ramdisk/bezugwatt0pos)
		else
			importtemp=$(timeout 4 mosquitto_sub -t openWB/evu/WHImported_temp)
			if ! [[ $importtemp =~ $ra ]] ; then
				importtemp="0"
			fi
			openwbDebugLog "MAIN" 0 "loadvars read openWB/evu/WHImported_temp from mosquito $importtemp"
			echo $importtemp > /var/www/html/openWB/ramdisk/bezugwatt0pos
		fi
		if [[ -e /var/www/html/openWB/ramdisk/bezugwatt0neg ]]; then
			exporttemp=$(</var/www/html/openWB/ramdisk/bezugwatt0neg)
		else
			exporttemp=$(timeout 4 mosquitto_sub -t openWB/evu/WHExport_temp)
			if ! [[ $exporttemp =~ $ra ]] ; then
				exporttemp="0"
			fi
			openwbDebugLog "MAIN" 0 "loadvars read openWB/evu/WHExport_temp from mosquito $exporttemp"
			echo $exporttemp > /var/www/html/openWB/ramdisk/bezugwatt0neg
		fi
		sudo python /var/www/html/openWB/runs/simcount.py "$watt2" bezug bezugkwh einspeisungkwh
		importtemp1=$(</var/www/html/openWB/ramdisk/bezugwatt0pos)
		exporttemp1=$(</var/www/html/openWB/ramdisk/bezugwatt0neg)
		if [[ $importtemp !=  "$importtemp1" ]]; then
			mosquitto_pub -t openWB/evu/WHImported_temp -r -m "$importtemp1"
		fi
		if [[ $exporttemp !=  "$exporttemp1" ]]; then
			mosquitto_pub -t openWB/evu/WHExport_temp -r -m "$exporttemp1"
		fi
		# sim bezug end
	fi

	usesimpv=0
	if [[ $speichermodul == "speicher_kostalplenticore" ]] && [[ $pvwattmodul == "wr_plenticore" ]]; then
		usesimpv=1
	fi
	if [[ $pvwattmodul == "wr_rct" ]] || [[ $pvwattmodul == "wr_kostalpikovar2" ]] ; then
		usesimpv=1
	fi
	if ((usesimpv == 1)); then
		ra='^-?[0-9]+$'
		#rechnen nur auf wr1
		watt3=$(</var/www/html/openWB/ramdisk/pv1watt)
		if [[ -e /var/www/html/openWB/ramdisk/pvwatt0pos ]]; then
			importtemp=$(</var/www/html/openWB/ramdisk/pvwatt0pos)
		else
			importtemp=$(timeout 4 mosquitto_sub -t openWB/pv/WHImported_temp)
			if ! [[ $importtemp =~ $ra ]] ; then
				importtemp="0"
			fi
			openwbDebugLog "MAIN" 0 "loadvars read openWB/pv/WHImported_temp from mosquito $importtemp"
			echo $importtemp > /var/www/html/openWB/ramdisk/pvwatt0pos
		fi
		if [[ -e /var/www/html/openWB/ramdisk/pvwatt0neg ]]; then
			exporttemp=$(</var/www/html/openWB/ramdisk/pvwatt0neg)
		else
			exporttemp=$(timeout 4 mosquitto_sub -t openWB/pv/WHExport_temp)
			if ! [[ $exporttemp =~ $ra ]] ; then
				exporttemp="0"
			fi
			openwbDebugLog "MAIN" 0 "loadvars read openWB/pv/WHExport_temp from mosquito $exporttemp"
			echo $exporttemp > /var/www/html/openWB/ramdisk/pvwatt0neg
		fi
		sudo python /var/www/html/openWB/runs/simcount.py "$watt3" pv pvposkwh pvkwh
		importtemp1=$(</var/www/html/openWB/ramdisk/pvwatt0pos)
		exporttemp1=$(</var/www/html/openWB/ramdisk/pvwatt0neg)
		if [[ $importtemp !=  "$importtemp1" ]]; then
			mosquitto_pub -t openWB/pv/WHImported_temp -r -m "$importtemp1"
		fi
		if [[ $exporttemp !=  "$exporttemp1" ]]; then
			mosquitto_pub -t openWB/pv/WHExport_temp -r -m "$exporttemp1"
		fi
		# sim pv end
	fi
	#simcount für wr2
	usesimpv2=0
	#addition Zaehler pv1 und pv2 nach Simcount
	if ((pv2vorhanden == 1)); then
		pvkwh=$(</var/www/html/openWB/ramdisk/pvkwh)
		pv2kwh=$(</var/www/html/openWB/ramdisk/pv2kwh)
		pvallwh=$(echo "$pvkwh + $pv2kwh" |bc)
		echo "$pvallwh" > /var/www/html/openWB/ramdisk/pvallwh
	fi

	if [[ $speichermodul == "speicher_tesvoltsma" ]] || [[ $speichermodul == "speicher_rct" ]] || [[ $speichermodul == "speicher_kostalplenticore" ]] ; then
		ra='^-?[0-9]+$'
		watt2=$(</var/www/html/openWB/ramdisk/speicherleistung)
		if [[ -e /var/www/html/openWB/ramdisk/speicherwatt0pos ]]; then
			importtemp=$(</var/www/html/openWB/ramdisk/speicherwatt0pos)
		else
			importtemp=$(timeout 4 mosquitto_sub -t openWB/housebattery/WHImported_temp)
			if ! [[ $importtemp =~ $ra ]] ; then
				importtemp="0"
			fi
			openwbDebugLog "MAIN" 0 "loadvars read openWB/housebattery/WHImported_temp from mosquito $importtemp"
			echo $importtemp > /var/www/html/openWB/ramdisk/speicherwatt0pos
		fi
		if [[ -e /var/www/html/openWB/ramdisk/speicherwatt0neg ]]; then
			exporttemp=$(</var/www/html/openWB/ramdisk/speicherwatt0neg)
		else
			exporttemp=$(timeout 4 mosquitto_sub -t openWB/housebattery/WHExport_temp)
			if ! [[ $exporttemp =~ $ra ]] ; then
				exporttemp="0"
			fi
			openwbDebugLog "MAIN" 0 "loadvars read openWB/housebattery/WHExport_temp from mosquito $exporttemp"
			echo $exporttemp > /var/www/html/openWB/ramdisk/speicherwatt0neg
		fi
		sudo python /var/www/html/openWB/runs/simcount.py "$watt2" speicher speicherikwh speicherekwh
		importtemp1=$(</var/www/html/openWB/ramdisk/speicherwatt0pos)
		exporttemp1=$(</var/www/html/openWB/ramdisk/speicherwatt0neg)
		if [[ $importtemp !=  "$importtemp1" ]]; then
			mosquitto_pub -t openWB/housebattery/WHImported_temp -r -m "$importtemp1"
		fi
		if [[ $exporttemp !=  "$exporttemp1" ]]; then
			mosquitto_pub -t openWB/housebattery/WHExport_temp -r -m "$exporttemp1"
		fi
		# sim speicher end
	fi

	if ((verbraucher1_aktiv == 1)) && [[ $verbraucher1_typ == "shelly" ]]; then
		ra='^-?[0-9]+$'
		watt3=$(</var/www/html/openWB/ramdisk/verbraucher1_watt)
		if [[ -e /var/www/html/openWB/ramdisk/verbraucher1watt0pos ]]; then
			importtemp=$(</var/www/html/openWB/ramdisk/verbraucher1watt0pos)
		else
			importtemp=$(timeout 4 mosquitto_sub -t openWB/Verbraucher/1/WH1Imported_temp)
			if ! [[ $importtemp =~ $ra ]] ; then
				importtemp="0"
			fi
			openwbDebugLog "MAIN" 0 "loadvars read openWB/Verbraucher/1/WHImported_temp from mosquito $importtemp"
			echo $importtemp > /var/www/html/openWB/ramdisk/verbraucher1watt0pos
		fi
		if [[ -e /var/www/html/openWB/ramdisk/verbraucher1watt0neg ]]; then
			exporttemp=$(</var/www/html/openWB/ramdisk/verbraucher1watt0neg)
		else
			exporttemp=$(timeout 4 mosquitto_sub -t openWB/verbraucher/1/WH1Export_temp)
			if ! [[ $exporttemp =~ $ra ]] ; then
				exporttemp="0"
			fi
			openwbDebugLog "MAIN" 0 "loadvars read openWB/verbraucher/1/WHExport_temp from mosquito $exporttemp"
			echo $exporttemp > /var/www/html/openWB/ramdisk/verbraucher1watt0neg
		fi
		sudo python /var/www/html/openWB/runs/simcount.py "$watt3" verbraucher1 verbraucher1_wh verbraucher1_whe
		importtemp1=$(</var/www/html/openWB/ramdisk/verbraucher1watt0pos)
		exporttemp1=$(</var/www/html/openWB/ramdisk/verbraucher1watt0neg)
		if [[ $importtemp !=  "$importtemp1" ]]; then
			mosquitto_pub -t openWB/verbraucher/1/WHImported_temp -r -m "$importtemp1"
		fi
		if [[ $exporttemp !=  "$exporttemp1" ]]; then
			mosquitto_pub -t openWB/verbraucher/1/WHExport_temp -r -m "$exporttemp1"
		fi
		# sim verbraucher end
	fi

	#Uhrzeit
	date=$(date)
	H=$(date +%H)
	if ((debug == 1)); then
		echo "$(tail -1500 /var/www/html/openWB/ramdisk/openWB.log)" > /var/www/html/openWB/ramdisk/openWB.log
	fi
	if [[ $speichermodul != "none" ]] ; then
		openwbDebugLog "MAIN" 1 "speicherleistung $speicherleistung speichersoc $speichersoc"
	fi
	if ((etprovideraktiv == 1)); then
		openwbDebugLog "MAIN" 1 "etproviderprice $etproviderprice etprovidermaxprice $etprovidermaxprice"
	fi
	openwbDebugLog "MAIN" 1 "pv1watt $pv1watt pv2watt $pv2watt pvwatt $pvwatt ladeleistung $ladeleistung llalt $llalt nachtladen $nachtladen nachtladen $nachtladens1 minimalA $minimalstromstaerke maximalA $maximalstromstaerke"
	openwbDebugLog "MAIN" 1 "$(echo -e "lla1 $lla1 llv1 $llv1 llas11 $llas11 llas21 $llas21 mindestuberschuss $mindestuberschuss abschaltuberschuss $abschaltuberschuss lademodus $lademodus")"
	openwbDebugLog "MAIN" 1 "$(echo -e "lla2 $lla2 llv2 $llv2 llas12 $llas12 llas22 $llas22 sofortll $sofortll hausverbrauch $hausverbrauch wattbezug $wattbezug uberschuss $uberschuss")"
	openwbDebugLog "MAIN" 1 "$(echo -e "lla3 $lla3 llv3 $llv3 llas13 $llas13 llas23 $llas23 soclp1 $soc soclp2 $soc1")"
	openwbDebugLog "MAIN" 1 "EVU 1:${evuv1}V/${evua1}A 2: ${evuv2}V/${evua2}A 3: ${evuv3}V/${evua3}A"
	openwbDebugLog "MAIN" 1 "$(echo -e "lp1enabled $lp1enabled lp2enabled $lp2enabled lp3enabled $lp3enabled")"
	openwbDebugLog "MAIN" 1 "$(echo -e "plugstatlp1 $plugstat plugstatlp2 $plugstatlp2 plugstatlp3 $plugstatlp3")"
	openwbDebugLog "MAIN" 1 "$(echo -e "chargestatlp1 $chargestat chargestatlp2 $chargestatlp2 chargestatlp3 $chargestatlp3")"
	if ((standardSocketInstalled == 1)); then
		openwbDebugLog "MAIN" 1 "socketa $socketa socketp $socketp socketkwh $socketkwh socketv $socketv"
	fi

	tempPubList=""

	if [[ "$opvwatt" != "$pvwatt" ]]; then
		tempPubList="${tempPubList}\nopenWB/pv/W=${pvwatt}"
		echo "$pvwatt" > ramdisk/mqttpvwatt
	fi
	if [[ "$owattbezug" != "$wattbezug" ]]; then
		tempPubList="${tempPubList}\nopenWB/evu/W=${wattbezug}"
		echo "$wattbezug" > ramdisk/mqttwattbezug
	fi
	if [[ "$ollaktuell" != "$ladeleistunglp1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/W=${ladeleistunglp1}"
		echo "$ladeleistunglp1" > ramdisk/mqttladeleistunglp1
	fi
	if [[ "$oladestatus" != "$ladestatus" ]]; then
		tempPubList="${tempPubList}\nopenWB/ChargeStatus=${ladestatus}"
		echo "$ladestatus" > ramdisk/mqttlastladestatus
	fi
	# TODO: wann wird der Lademodus geändert?
	if [[ "$olademodus" != "$lademodus" ]]; then
		tempPubList="${tempPubList}\nopenWB/global/ChargeMode=${lademodus}"
		echo "$lademodus" > ramdisk/mqttlastlademodus
	fi
	if [[ "$ohausverbrauch" != "$hausverbrauch" ]]; then
		tempPubList="${tempPubList}\nopenWB/global/WHouseConsumption=${hausverbrauch}"
		echo "$hausverbrauch" > ramdisk/mqtthausverbrauch
	fi
	if [[ "$ollaktuells1" != "$ladeleistungs1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/W=${ladeleistungs1}"
		echo "$ladeleistungs1" > ramdisk/mqttladeleistungs1
	fi
	if [[ "$ollaktuells2" != "$ladeleistungs2" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/3/W=${ladeleistungs2}"
		echo "$ladeleistungs2" > ramdisk/mqttladeleistungs2
	fi
	if [[ "$ollkombiniert" != "$ladeleistung" ]]; then
		tempPubList="${tempPubList}\nopenWB/global/WAllChargePoints=${ladeleistung}"
		echo "$ladeleistung" > ramdisk/mqttladeleistung
	fi
	if [[ "$ospeicherleistung" != "$speicherleistung" ]]; then
		tempPubList="${tempPubList}\nopenWB/housebattery/W=${speicherleistung}"
		echo "$speicherleistung" > ramdisk/mqttspeicherleistung
	fi
	if [[ "$ospeichersoc" != "$speichersoc" ]]; then
		tempPubList="${tempPubList}\nopenWB/housebattery/%Soc=${speichersoc}"
		echo "$speichersoc" > ramdisk/mqttspeichersoc
	fi
	if [[ "$osoc" != "$soc" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/%Soc=${soc}"
		echo "$soc" > ramdisk/mqttsoc
	fi
	if [[ "$osoc1" != "$soc1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/%Soc=${soc1}"
		echo "$soc1" > ramdisk/mqttsoc1
	fi
	if [[ "$ostopchargeafterdisclp1" != "$stopchargeafterdisclp1" ]]; then
		tempPubList="${tempPubList}\nopenWB/config/get/lp/1/stopchargeafterdisc=${stopchargeafterdisclp1}"
		echo "$stopchargeafterdisclp1" > ramdisk/mqttstopchargeafterdisclp1
	fi
	if [[ "$ostopchargeafterdisclp2" != "$stopchargeafterdisclp2" ]]; then
		tempPubList="${tempPubList}\nopenWB/config/get/lp/2/stopchargeafterdisc=${stopchargeafterdisclp2}"
		echo "$stopchargeafterdisclp2" > ramdisk/mqttstopchargeafterdisclp2
	fi
	if [[ "$ostopchargeafterdisclp3" != "$stopchargeafterdisclp3" ]]; then
		tempPubList="${tempPubList}\nopenWB/config/get/lp/3/stopchargeafterdisc=${stopchargeafterdisclp3}"
		echo "$stopchargeafterdisclp3" > ramdisk/mqttstopchargeafterdisclp3
	fi
	if [[ "$ostopchargeafterdisclp4" != "$stopchargeafterdisclp4" ]]; then
		tempPubList="${tempPubList}\nopenWB/config/get/lp/4/stopchargeafterdisc=${stopchargeafterdisclp4}"
		echo "$stopchargeafterdisclp4" > ramdisk/mqttstopchargeafterdisclp4
	fi
	if [[ "$ostopchargeafterdisclp5" != "$stopchargeafterdisclp5" ]]; then
		tempPubList="${tempPubList}\nopenWB/config/get/lp/5/stopchargeafterdisc=${stopchargeafterdisclp5}"
		echo "$stopchargeafterdisclp5" > ramdisk/mqttstopchargeafterdisclp5
	fi
	if [[ "$ostopchargeafterdisclp6" != "$stopchargeafterdisclp6" ]]; then
		tempPubList="${tempPubList}\nopenWB/config/get/lp/6/stopchargeafterdisc=${stopchargeafterdisclp6}"
		echo "$stopchargeafterdisclp6" > ramdisk/mqttstopchargeafterdisclp6
	fi
	if [[ "$ostopchargeafterdisclp7" != "$stopchargeafterdisclp7" ]]; then
		tempPubList="${tempPubList}\nopenWB/config/get/lp/7/stopchargeafterdisc=${stopchargeafterdisclp7}"
		echo "$stopchargeafterdisclp7" > ramdisk/mqttstopchargeafterdisclp7
	fi
	if [[ "$ostopchargeafterdisclp8" != "$stopchargeafterdisclp8" ]]; then
		tempPubList="${tempPubList}\nopenWB/config/get/lp/8/stopchargeafterdisc=${stopchargeafterdisclp8}"
		echo "$stopchargeafterdisclp8" > ramdisk/mqttstopchargeafterdisclp8
	fi
	if ((rfidakt == 1)); then
		rfid
	fi

	csvfile="/var/www/html/openWB/web/logging/data/daily/$(date +%Y%m%d).csv"
	first=$(head -n 1 "$csvfile")
	last=$(tail -n 1 "$csvfile")
	dailychargelp1=$(echo "$(echo "$first" | cut -d , -f 5) $(echo "$last" | cut -d , -f 5)" | awk '{printf "%0.2f", ($2 - $1)/1000}')
	dailychargelp2=$(echo "$(echo "$first" | cut -d , -f 6) $(echo "$last" | cut -d , -f 6)" | awk '{printf "%0.2f", ($2 - $1)/1000}')
	dailychargelp3=$(echo "$(echo "$first" | cut -d , -f 7) $(echo "$last" | cut -d , -f 7)" | awk '{printf "%0.2f", ($2 - $1)/1000}')

	restzeitlp1=$(<ramdisk/restzeitlp1)
	restzeitlp2=$(<ramdisk/restzeitlp2)
	restzeitlp3=$(<ramdisk/restzeitlp3)
	gelrlp1=$(<ramdisk/gelrlp1)
	gelrlp2=$(<ramdisk/gelrlp2)
	gelrlp3=$(<ramdisk/gelrlp3)

	lastregelungaktiv=$(<ramdisk/lastregelungaktiv)
	hook1aktiv=$(<ramdisk/hook1akt)
	hook2aktiv=$(<ramdisk/hook2akt)
	hook3aktiv=$(<ramdisk/hook3akt)
	if [[ "$odailychargelp1" != "$dailychargelp1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/kWhDailyCharged=${dailychargelp1}"
		echo "$dailychargelp1" > ramdisk/mqttdailychargelp1
	fi
	if [[ "$odailychargelp2" != "$dailychargelp2" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/kWhDailyCharged=${dailychargelp2}"
		echo "$dailychargelp2" > ramdisk/mqttdailychargelp2
	fi
	if [[ "$odailychargelp3" != "$dailychargelp3" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/3/kWhDailyCharged=${dailychargelp3}"
		echo "$dailychargelp3" > ramdisk/mqttdailychargelp3
	fi
	if [[ "$orestzeitlp1" != "$restzeitlp1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/TimeRemaining=${restzeitlp1}"
		echo "$restzeitlp1" > ramdisk/mqttrestzeitlp1
	fi
	if [[ "$orestzeitlp2" != "$restzeitlp2" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/TimeRemaining=${restzeitlp2}"
		echo "$restzeitlp2" > ramdisk/mqttrestzeitlp2
	fi
	if [[ "$orestzeitlp3" != "$restzeitlp3" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/3/TimeRemaining=${restzeitlp3}"
		echo "$restzeitlp3" > ramdisk/mqttrestzeitlp3
	fi
	if [[ "$ogelrlp1" != "$gelrlp1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/kmCharged=${gelrlp1}"
		echo "$gelrlp1" > ramdisk/mqttgelrlp1
	fi
	if [[ "$ogelrlp2" != "$gelrlp2" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/kmCharged=${gelrlp2}"
		echo "$gelrlp2" > ramdisk/mqttgelrlp2
	fi
	if [[ "$ogelrlp3" != "$gelrlp3" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/3/kmCharged=${gelrlp3}"
		echo "$gelrlp3" > ramdisk/mqttgelrlp3
	fi
	ohook1_aktiv=$(<ramdisk/mqtthook1_aktiv)
	if [[ "$ohook1_aktiv" != "$hook1_aktiv" ]]; then
		tempPubList="${tempPubList}\nopenWB/hook/1/boolHookConfigured=${hook1_aktiv}"
		echo "$hook1_aktiv" > ramdisk/mqtthook1_aktiv
	fi
	ohook2_aktiv=$(<ramdisk/mqtthook2_aktiv)
	if [[ "$ohook2_aktiv" != "$hook2_aktiv" ]]; then
		tempPubList="${tempPubList}\nopenWB/hook/2/boolHookConfigured=${hook2_aktiv}"
		echo "$hook2_aktiv" > ramdisk/mqtthook2_aktiv
	fi
	ohook3_aktiv=$(<ramdisk/mqtthook3_aktiv)
	if [[ "$ohook3_aktiv" != "$hook3_aktiv" ]]; then
		tempPubList="${tempPubList}\nopenWB/hook/3/boolHookConfigured=${hook3_aktiv}"
		echo "$hook3_aktiv" > ramdisk/mqtthook3_aktiv
	fi

	if ((ohook1aktiv != hook1aktiv)); then
		tempPubList="${tempPubList}\nopenWB/boolHook1Active=${hook1aktiv}"
		echo "$hook1aktiv" > ramdisk/mqtthook1aktiv
	fi
	if ((ohook2aktiv != hook2aktiv)); then
		tempPubList="${tempPubList}\nopenWB/boolHook2Active=${hook2aktiv}"
		echo "$hook2aktiv" > ramdisk/mqtthook2aktiv
	fi
	if ((ohook3aktiv != hook3aktiv)); then
		tempPubList="${tempPubList}\nopenWB/boolHook3Active=${hook3aktiv}"
		echo "$hook3aktiv" > ramdisk/mqtthook3aktiv
	fi
	oversion=$(<ramdisk/mqttversion)
	if [[ $oversion != "$version" ]]; then
		tempPubList="${tempPubList}\nopenWB/system/Version=${version}"
		echo -n "$version" > ramdisk/mqttversion
	fi

	ocp1config=$(<ramdisk/mqttCp1Configured)
	if ((ocp1config != 1)); then
		tempPubList="${tempPubList}\nopenWB/lp/1/boolChargePointConfigured=1"
		echo 1 > ramdisk/mqttCp1Configured
	fi

	olastmanagement=$(<ramdisk/mqttlastmanagement)
	if [[ "$olastmanagement" != "$lastmanagement" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/boolChargePointConfigured=${lastmanagement}"
		echo "$lastmanagement" > ramdisk/mqttlastmanagement
	fi
	osoc1vorhanden=$(<ramdisk/mqttsoc1vorhanden)
	if [[ "$osoc1vorhanden" != "$soc1vorhanden" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/boolSocConfigured=${soc1vorhanden}"
		echo "$soc1vorhanden" > ramdisk/mqttsoc1vorhanden
	fi
	osocvorhanden=$(<ramdisk/mqttsocvorhanden)
	if [[ "$osocvorhanden" != "$socvorhanden" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/boolSocConfigured=${socvorhanden}"
		echo "$socvorhanden" > ramdisk/mqttsocvorhanden
	fi

	olastmanagements2=$(<ramdisk/mqttlastmanagements2)
	if [[ "$olastmanagements2" != "$lastmanagements2" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/3/boolChargePointConfigured=${lastmanagements2}"
		echo "$lastmanagements2" > ramdisk/mqttlastmanagements2
	fi
	olastmanagementlp4=$(<ramdisk/mqttlastmanagementlp4)
	if [[ "$olastmanagementlp4" != "$lastmanagementlp4" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/4/boolChargePointConfigured=${lastmanagementlp4}"
		echo "$lastmanagementlp4" > ramdisk/mqttlastmanagementlp4
	fi
	olastmanagementlp5=$(<ramdisk/mqttlastmanagementlp5)
	if [[ "$olastmanagementlp5" != "$lastmanagementlp5" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/5/boolChargePointConfigured=${lastmanagementlp5}"
		echo "$lastmanagementlp5" > ramdisk/mqttlastmanagementlp5
	fi
	olastmanagementlp6=$(<ramdisk/mqttlastmanagementlp6)
	if [[ "$olastmanagementlp6" != "$lastmanagementlp6" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/6/boolChargePointConfigured=${lastmanagementlp6}"
		echo "$lastmanagementlp6" > ramdisk/mqttlastmanagementlp6
	fi
	olastmanagementlp7=$(<ramdisk/mqttlastmanagementlp7)
	if [[ "$olastmanagementlp7" != "$lastmanagementlp7" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/7/boolChargePointConfigured=${lastmanagementlp7}"
		echo "$lastmanagementlp7" > ramdisk/mqttlastmanagementlp7
	fi
	olastmanagementlp8=$(<ramdisk/mqttlastmanagementlp8)
	if [[ "$olastmanagementlp8" != "$lastmanagementlp8" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/8/boolChargePointConfigured=${lastmanagementlp8}"
		echo "$lastmanagementlp8" > ramdisk/mqttlastmanagementlp8
	fi
	olademstat=$(<ramdisk/mqttlademstat)
	if [[ "$olademstat" != "$lademstat" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/boolDirectModeChargekWh=${lademstat}"
		echo "$lademstat" > ramdisk/mqttlademstat
	fi
	olademstats1=$(<ramdisk/mqttlademstats1)
	if [[ "$olademstats1" != "$lademstats1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/boolDirectModeChargekWh=${lademstats1}"
		echo "$lademstats1" > ramdisk/mqttlademstats1
	fi
	olademstats2=$(<ramdisk/mqttlademstats2)
	if [[ "$olademstats2" != "$lademstats2" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/3/boolDirectModeChargekWh=${lademstats2}"
		echo "$lademstats2" > ramdisk/mqttlademstats2
	fi
	olademstatlp4=$(<ramdisk/mqttlademstatlp4)
	if [[ "$olademstatlp4" != "$lademstatlp4" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/4/boolDirectModeChargekWh=${lademstatlp4}"
		echo "$lademstatlp4" > ramdisk/mqttlademstatlp4
	fi
	olademstatlp5=$(<ramdisk/mqttlademstatlp5)
	if [[ "$olademstatlp5" != "$lademstatlp5" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/5/boolDirectModeChargekWh=${lademstatlp5}"
		echo "$lademstatlp5" > ramdisk/mqttlademstatlp5
	fi
	olademstatlp6=$(<ramdisk/mqttlademstatlp6)
	if [[ "$olademstatlp6" != "$lademstatlp6" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/6/boolDirectModeChargekWh=${lademstatlp6}"
		echo "$lademstatlp6" > ramdisk/mqttlademstatlp6
	fi
	olademstatlp7=$(<ramdisk/mqttlademstatlp7)
	if [[ "$olademstatlp7" != "$lademstatlp7" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/7/boolDirectModeChargekWh=${lademstatlp7}"
		echo "$lademstatlp7" > ramdisk/mqttlademstatlp7
	fi
	olademstatlp8=$(<ramdisk/mqttlademstatlp8)
	if [[ "$olademstatlp8" != "$lademstatlp8" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/8/boolDirectModeChargekWh=${lademstatlp8}"
		echo "$lademstatlp8" > ramdisk/mqttlademstatlp8
	fi

	osofortsocstatlp1=$(<ramdisk/mqttsofortsocstatlp1)
	if [[ "$osofortsocstatlp1" != "$sofortsocstatlp1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/boolDirectChargeModeSoc=${sofortsocstatlp1}"
		echo "$sofortsocstatlp1" > ramdisk/mqttsofortsocstatlp1
	fi

	osofortsocstatlp2=$(<ramdisk/mqttsofortsocstatlp2)
	if [[ "$osofortsocstatlp2" != "$sofortsocstatlp2" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/boolDirectChargeModeSoc=${sofortsocstatlp2}"
		echo "$sofortsocstatlp2" > ramdisk/mqttsofortsocstatlp2
	fi

	ospeichervorhanden=$(<ramdisk/mqttspeichervorhanden)
	if ((ospeichervorhanden != speichervorhanden)); then
		tempPubList="${tempPubList}\nopenWB/housebattery/boolHouseBatteryConfigured=${speichervorhanden}"
		echo "$speichervorhanden" > ramdisk/mqttspeichervorhanden
	fi
	opv1vorhanden=$(<ramdisk/mqttpv1vorhanden)
	if ((opv1vorhanden != pv1vorhanden)); then
		tempPubList="${tempPubList}\nopenWB/pv/1/boolPVConfigured=${pv1vorhanden}"
		echo "$pv1vorhanden" > ramdisk/mqttpv1vorhanden
	fi
	opv2vorhanden=$(<ramdisk/mqttpv2vorhanden)
	if ((opv2vorhanden != pv2vorhanden)); then
		tempPubList="${tempPubList}\nopenWB/pv/2/boolPVConfigured=${pv2vorhanden}"
		echo "$pv2vorhanden" > ramdisk/mqttpv2vorhanden
	fi
	olp1name=$(<ramdisk/mqttlp1name)
	if [[ "$olp1name" != "$lp1name" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/strChargePointName=${lp1name}"
		echo "$lp1name" > ramdisk/mqttlp1name
	fi
	olp2name=$(<ramdisk/mqttlp2name)
	if [[ "$olp2name" != "$lp2name" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/strChargePointName=${lp2name}"
		echo "$lp2name" > ramdisk/mqttlp2name
	fi
	olp3name=$(<ramdisk/mqttlp3name)
	if [[ "$olp3name" != "$lp3name" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/3/strChargePointName=${lp3name}"
		echo "$lp3name" > ramdisk/mqttlp3name
	fi
	olp4name=$(<ramdisk/mqttlp4name)
	if [[ "$olp4name" != "$lp4name" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/4/strChargePointName=${lp4name}"
		echo "$lp4name" > ramdisk/mqttlp4name
	fi
	olp5name=$(<ramdisk/mqttlp5name)
	if [[ "$olp5name" != "$lp5name" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/5/strChargePointName=${lp5name}"
		echo "$lp5name" > ramdisk/mqttlp5name
	fi
	olp6name=$(<ramdisk/mqttlp6name)
	if [[ "$olp6name" != "$lp6name" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/6/strChargePointName=${lp6name}"
		echo "$lp6name" > ramdisk/mqttlp6name
	fi
	olp7name=$(<ramdisk/mqttlp7name)
	if [[ "$olp7name" != "$lp7name" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/7/strChargePointName=${lp7name}"
		echo "$lp7name" > ramdisk/mqttlp7name
	fi
	olp8name=$(<ramdisk/mqttlp8name)
	if [[ "$olp8name" != "$lp8name" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/8/strChargePointName=${lp8name}"
		echo "$lp8name" > ramdisk/mqttlp8name
	fi
	ozielladenaktivlp1=$(<ramdisk/mqttzielladenaktivlp1)
	if [[ "$ozielladenaktivlp1" != "$zielladenaktivlp1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/boolFinishAtTimeChargeActive=${zielladenaktivlp1}"
		echo "$zielladenaktivlp1" > ramdisk/mqttzielladenaktivlp1
	fi
	onachtladen=$(<ramdisk/mqttnachtladen)
	if [[ "$onachtladen" != "$nachtladen" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/boolChargeAtNight=${nachtladen}"
		echo "$nachtladen" > ramdisk/mqttnachtladen
	fi
	onachtladens1=$(<ramdisk/mqttnachtladens1)
	if [[ "$onachtladens1" != "$nachtladens1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/boolChargeAtNight=${nachtladens1}"
		echo "$nachtladens1" > ramdisk/mqttnachtladens1
	fi
	onlakt_sofort=$(<ramdisk/mqttnlakt_sofort)
	if [[ "$onlakt_sofort" != "$nlakt_sofort" ]]; then
		tempPubList="${tempPubList}\nopenWB/boolChargeAtNight_direct=${nlakt_sofort}"
		echo "$nlakt_sofort" > ramdisk/mqttnlakt_sofort
	fi
	onlakt_nurpv=$(<ramdisk/mqttnlakt_nurpv)
	if [[ "$onlakt_nurpv" != "$nlakt_nurpv" ]]; then
		tempPubList="${tempPubList}\nopenWB/boolChargeAtNight_nurpv=${nlakt_nurpv}"
		echo "$nlakt_nurpv" > ramdisk/mqttnlakt_nurpv
	fi
	onlakt_minpv=$(<ramdisk/mqttnlakt_minpv)
	if [[ "$onlakt_minpv" != "$nlakt_minpv" ]]; then
		tempPubList="${tempPubList}\nopenWB/boolChargeAtNight_minpv=${nlakt_minpv}"
		echo "$nlakt_minpv" > ramdisk/mqttnlakt_minpv
	fi

	onlakt_standby=$(<ramdisk/mqttnlakt_standby)
	if [[ "$onlakt_standby" != "$nlakt_standby" ]]; then
		tempPubList="${tempPubList}\nopenWB/boolChargeAtNight_standby=${nlakt_standby}"
		echo "$nlakt_standby" > ramdisk/mqttnlakt_standby
	fi
	ohausverbrauchstat=$(<ramdisk/mqtthausverbrauchstat)
	if [[ "$ohausverbrauchstat" != "$hausverbrauchstat" ]]; then
		tempPubList="${tempPubList}\nopenWB/boolDisplayHouseConsumption=${hausverbrauchstat}"
		echo "$hausverbrauchstat" > ramdisk/mqtthausverbrauchstat
	fi
	oheutegeladen=$(<ramdisk/mqttheutegeladen)
	if [[ "$oheutegeladen" != "$heutegeladen" ]]; then
		tempPubList="${tempPubList}\nopenWB/boolDisplayDailyCharged=${heutegeladen}"
		echo "$heutegeladen" > ramdisk/mqttheutegeladen
	fi
	oevuglaettungakt=$(<ramdisk/mqttevuglaettungakt)
	if [[ "$oevuglaettungakt" != "$evuglaettungakt" ]]; then
		tempPubList="${tempPubList}\nopenWB/boolEvuSmoothedActive=${evuglaettungakt}"
		echo "$evuglaettungakt" > ramdisk/mqttevuglaettungakt
	fi
	onurpv70dynact=$(<ramdisk/mqttnurpv70dynact)
	if [[ "$onurpv70dynact" != "$nurpv70dynact" ]]; then
		tempPubList="${tempPubList}\nopenWB/pv/bool70PVDynActive=${nurpv70dynact}"
		tempPubList="${tempPubList}\nopenWB/config/get/pv/nurpv70dynact=${nurpv70dynact}"
		echo "$nurpv70dynact" > ramdisk/mqttnurpv70dynact
	fi
	onurpv70dynw=$(<ramdisk/mqttnurpv70dynw)
	if [[ "$onurpv70dynw" != "$nurpv70dynw" ]]; then
		tempPubList="${tempPubList}\nopenWB/pv/W70PVDyn=${nurpv70dynw}"
		tempPubList="${tempPubList}\nopenWB/config/get/pv/nurpv70dynw=${nurpv70dynw}"
		echo "$nurpv70dynw" > ramdisk/mqttnurpv70dynw
	fi

	overbraucher1_name=$(<ramdisk/mqttverbraucher1_name)
	if [[ "$overbraucher1_name" != "$verbraucher1_name" ]]; then
		tempPubList="${tempPubList}\nopenWB/Verbraucher/1/Name=${verbraucher1_name}"
		echo "$verbraucher1_name" > ramdisk/mqttverbraucher1_name
	fi
	overbraucher1_aktiv=$(<ramdisk/mqttverbraucher1_aktiv)
	if [[ "$overbraucher1_aktiv" != "$verbraucher1_aktiv" ]]; then
		tempPubList="${tempPubList}\nopenWB/Verbraucher/1/Configured=${verbraucher1_aktiv}"
		echo "$verbraucher1_aktiv" > ramdisk/mqttverbraucher1_aktiv
	fi
	overbraucher2_aktiv=$(<ramdisk/mqttverbraucher2_aktiv)
	if [[ "$overbraucher2_aktiv" != "$verbraucher2_aktiv" ]]; then
		tempPubList="${tempPubList}\nopenWB/Verbraucher/2/Configured=${verbraucher2_aktiv}"
		echo "$verbraucher2_aktiv" > ramdisk/mqttverbraucher2_aktiv
	fi

	overbraucher2_name=$(<ramdisk/mqttverbraucher2_name)
	if [[ "$overbraucher2_name" != "$verbraucher2_name" ]]; then
		tempPubList="${tempPubList}\nopenWB/Verbraucher/2/Name=${verbraucher2_name}"
		echo "$verbraucher2_name" > ramdisk/mqttverbraucher2_name
	fi

	ospeicherpveinbeziehen=$(<ramdisk/mqttspeicherpveinbeziehen)
	if [[ "$ospeicherpveinbeziehen" != "$speicherpveinbeziehen" ]]; then
		tempPubList="${tempPubList}\nopenWB/config/get/pv/priorityModeEVBattery=${speicherpveinbeziehen}"
		echo "$speicherpveinbeziehen" > ramdisk/mqttspeicherpveinbeziehen
	fi
	oetprovideraktiv=$(<ramdisk/mqttetprovideraktiv)
	if [[ "$oetprovideraktiv" != "$etprovideraktiv" ]]; then
		tempPubList="${tempPubList}\nopenWB/global/awattar/boolAwattarEnabled=${etprovideraktiv}"
		echo "$etprovideraktiv" > ramdisk/mqttetprovideraktiv
	fi
	oetprovider=$(<ramdisk/mqttetprovider)
	if [[ "$oetprovider" != "$etprovider" ]]; then
		tempPubList="${tempPubList}\nopenWB/global/ETProvider/modulePath=${etprovider}"
		echo "$etprovider" > ramdisk/mqttetprovider
	fi
	oetproviderprice=$(<ramdisk/mqttetproviderprice)
	etproviderprice=$(<ramdisk/etproviderprice)
	if [[ "$oetproviderprice" != "$etproviderprice" ]]; then
		tempPubList="${tempPubList}\nopenWB/global/awattar/ActualPriceForCharging=${etproviderprice}"
		echo "$etproviderprice" > ramdisk/mqttetproviderprice
	fi
	oetprovidermaxprice=$(<ramdisk/mqttetprovidermaxprice)
	etprovidermaxprice=$(<ramdisk/etprovidermaxprice)
	if [[ "$oetprovidermaxprice" != "$etprovidermaxprice" ]]; then
		tempPubList="${tempPubList}\nopenWB/global/awattar/MaxPriceForCharging=${etprovidermaxprice}"
		echo "$etprovidermaxprice" > ramdisk/mqttetprovidermaxprice
	fi
	odurchslp1=$(<ramdisk/mqttdurchslp1)
	if [[ "$odurchslp1" != "$durchslp1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/energyConsumptionPer100km=${durchslp1}"
		echo "$durchslp1" > ramdisk/mqttdurchslp1
	fi
	odurchslp2=$(<ramdisk/mqttdurchslp2)
	if [[ "$odurchslp2" != "$durchslp2" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/energyConsumptionPer100km=${durchslp2}"
		echo "$durchslp2" > ramdisk/mqttdurchslp2
	fi
	odurchslp3=$(<ramdisk/mqttdurchslp3)
	if [[ "$odurchslp3" != "$durchslp3" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/3/energyConsumptionPer100km=${durchslp3}"
		echo "$durchslp3" > ramdisk/mqttdurchslp3
	fi
	# publish last RFID scans as CSV with timestamp
	timestamp="$(date +%s)"

	orfidlp1=$(<ramdisk/mqttrfidlp1)
	arfidlp1=$(<ramdisk/rfidlp1)
	if [[ "$orfidlp1" != "$arfidlp1" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/1/lastRfId=${arfidlp1}"
		echo "$arfidlp1" > ramdisk/mqttrfidlp1
	fi

	orfidlp2=$(<ramdisk/mqttrfidlp2)
	arfidlp2=$(<ramdisk/rfidlp2)
	if [[ "$orfidlp2" != "$arfidlp2" ]]; then
		tempPubList="${tempPubList}\nopenWB/lp/2/lastRfId=${arfidlp2}"
		echo "$arfidlp2" > ramdisk/mqttrfidlp2
	fi

	orfidlast=$(<ramdisk/mqttrfidlasttag)
	arfidlast=$(<ramdisk/rfidlasttag)
	if [[ "$orfidlast" != "$arfidlast" ]]; then
		tempPubList="${tempPubList}\nopenWB/system/lastRfId=${arfidlast}"
		echo "$arfidlast" > ramdisk/mqttrfidlasttag
	fi

	ouiplast=$(<ramdisk/mqttupdateinprogress)
	auiplast=$(<ramdisk/updateinprogress)
	if [[ "$ouiplast" != "$auiplast" ]]; then
		tempPubList="${tempPubList}\nopenWB/system/updateInProgress=${auiplast}"
		echo "$auiplast" > ramdisk/mqttupdateinprogress
	fi

	arandomSleep=$(<ramdisk/randomSleepValue)
	orandomSleepValue=$(<ramdisk/mqttRandomSleepValue)
	if [[ "$orandomSleepValue" != "$arandomSleep" ]]; then
		tempPubList="${tempPubList}\nopenWB/system/randomSleep=${arandomSleep}"
		echo "$arandomSleep" > ramdisk/mqttRandomSleepValue
	fi

	declare -A mqttconfvar
	mqttconfvar["config/get/pv/minFeedinPowerBeforeStart"]=mindestuberschuss
	mqttconfvar["config/get/pv/maxPowerConsumptionBeforeStop"]=abschaltuberschuss
	mqttconfvar["config/get/pv/stopDelay"]=abschaltverzoegerung
	mqttconfvar["config/get/pv/startDelay"]=einschaltverzoegerung
	mqttconfvar["config/get/pv/minCurrentMinPv"]=minimalampv
	mqttconfvar["config/get/pv/lp/1/minCurrent"]=minimalapv
	mqttconfvar["config/get/pv/lp/2/minCurrent"]=minimalalp2pv
	mqttconfvar["config/get/pv/lp/1/minSocAlwaysToChargeTo"]=minnurpvsoclp1
	mqttconfvar["config/get/pv/lp/1/maxSocToChargeTo"]=maxnurpvsoclp1
	mqttconfvar["config/get/pv/lp/1/minSocAlwaysToChargeToCurrent"]=minnurpvsocll
	mqttconfvar["config/get/pv/chargeSubmode"]=pvbezugeinspeisung
	mqttconfvar["config/get/pv/regulationPoint"]=offsetpv
	mqttconfvar["config/get/pv/boolShowPriorityIconInTheme"]=speicherpvui
	mqttconfvar["config/get/pv/minBatteryChargePowerAtEvPriority"]=speichermaxwatt
	mqttconfvar["config/get/pv/minBatteryDischargeSocAtBattPriority"]=speichersocnurpv
	mqttconfvar["config/get/pv/batteryDischargePowerAtBattPriority"]=speicherwattnurpv
	mqttconfvar["config/get/pv/socStartChargeAtMinPv"]=speichersocminpv
	mqttconfvar["config/get/pv/socStopChargeAtMinPv"]=speichersochystminpv
	mqttconfvar["config/get/pv/boolAdaptiveCharging"]=adaptpv
	mqttconfvar["config/get/pv/adaptiveChargingFactor"]=adaptfaktor
	mqttconfvar["config/get/pv/nurpv70dynact"]=nurpv70dynact
	mqttconfvar["config/get/pv/nurpv70dynw"]=nurpv70dynw
	mqttconfvar["config/get/global/maxEVSECurrentAllowed"]=maximalstromstaerke
	mqttconfvar["config/get/global/minEVSECurrentAllowed"]=minimalstromstaerke
	mqttconfvar["config/get/global/dataProtectionAcknoledged"]=datenschutzack
	mqttconfvar["config/get/u1p3p/sofortPhases"]=u1p3psofort
	mqttconfvar["config/get/u1p3p/standbyPhases"]=u1p3pstandby
	mqttconfvar["config/get/u1p3p/nurpvPhases"]=u1p3pnurpv
	mqttconfvar["config/get/u1p3p/minundpvPhases"]=u1p3pminundpv
	mqttconfvar["config/get/u1p3p/nachtPhases"]=u1p3pnl
	mqttconfvar["config/get/u1p3p/isConfigured"]=u1p3paktiv
	mqttconfvar["config/get/sofort/lp/1/energyToCharge"]=lademkwh
	mqttconfvar["config/get/sofort/lp/2/energyToCharge"]=lademkwhs1
	mqttconfvar["config/get/sofort/lp/3/energyToCharge"]=lademkwhs2
	mqttconfvar["config/get/sofort/lp/4/energyToCharge"]=lademkwhlp4
	mqttconfvar["config/get/sofort/lp/5/energyToCharge"]=lademkwhlp5
	mqttconfvar["config/get/sofort/lp/6/energyToCharge"]=lademkwhlp6
	mqttconfvar["config/get/sofort/lp/7/energyToCharge"]=lademkwhlp7
	mqttconfvar["config/get/sofort/lp/8/energyToCharge"]=lademkwhlp8
	mqttconfvar["config/get/sofort/lp/1/socToChargeTo"]=sofortsoclp1
	mqttconfvar["config/get/sofort/lp/2/socToChargeTo"]=sofortsoclp2
	mqttconfvar["config/get/sofort/lp/1/chargeLimitation"]=msmoduslp1
	mqttconfvar["config/get/sofort/lp/2/chargeLimitation"]=msmoduslp2
	mqttconfvar["config/get/sofort/lp/3/chargeLimitation"]=msmoduslp3
	mqttconfvar["config/get/sofort/lp/4/chargeLimitation"]=msmoduslp4
	mqttconfvar["config/get/sofort/lp/5/chargeLimitation"]=msmoduslp5
	mqttconfvar["config/get/sofort/lp/6/chargeLimitation"]=msmoduslp6
	mqttconfvar["config/get/sofort/lp/7/chargeLimitation"]=msmoduslp7
	mqttconfvar["config/get/sofort/lp/8/chargeLimitation"]=msmoduslp8
	mqttconfvar["config/get/sofort/lp/1/etBasedCharging"]=lp1etbasedcharging
	mqttconfvar["config/get/sofort/lp/2/etBasedCharging"]=lp2etbasedcharging
	mqttconfvar["config/get/sofort/lp/3/etBasedCharging"]=lp3etbasedcharging
	mqttconfvar["config/get/sofort/lp/4/etBasedCharging"]=lp4etbasedcharging
	mqttconfvar["config/get/sofort/lp/5/etBasedCharging"]=lp5etbasedcharging
	mqttconfvar["config/get/sofort/lp/6/etBasedCharging"]=lp6etbasedcharging
	mqttconfvar["config/get/sofort/lp/7/etBasedCharging"]=lp7etbasedcharging
	mqttconfvar["config/get/sofort/lp/8/etBasedCharging"]=lp8etbasedcharging
	mqttconfvar["config/get/pv/lp/1/socLimitation"]=stopchargepvatpercentlp1
	mqttconfvar["config/get/pv/lp/2/socLimitation"]=stopchargepvatpercentlp2
	mqttconfvar["config/get/pv/lp/1/maxSoc"]=stopchargepvpercentagelp1
	mqttconfvar["config/get/pv/lp/2/maxSoc"]=stopchargepvpercentagelp2
	mqttconfvar["global/rfidConfigured"]=rfidakt
	mqttconfvar["system/priceForKWh"]=preisjekwh
	mqttconfvar["system/wizzardDone"]=wizzarddone
	mqttconfvar["config/get/display/chartEvuMinMax"]=displayevumax
	mqttconfvar["config/get/display/chartBatteryMinMax"]=displayspeichermax
	mqttconfvar["config/get/display/chartPvMax"]=displaypvmax
	mqttconfvar["config/get/display/showHouseConsumption"]=displayhausanzeigen
	mqttconfvar["config/get/display/chartHouseConsumptionMax"]=displayhausmax
	mqttconfvar["config/get/display/chartLp/1/max"]=displaylp1max
	mqttconfvar["config/get/display/chartLp/2/max"]=displaylp2max
	mqttconfvar["config/get/display/chartLp/3/max"]=displaylp3max
	mqttconfvar["config/get/display/chartLp/4/max"]=displaylp4max
	mqttconfvar["config/get/display/chartLp/5/max"]=displaylp5max
	mqttconfvar["config/get/display/chartLp/6/max"]=displaylp6max
	mqttconfvar["config/get/display/chartLp/7/max"]=displaylp7max
	mqttconfvar["config/get/display/chartLp/8/max"]=displaylp8max
	mqttconfvar["config/get/global/slaveMode"]=slavemode

	for mq in "${!mqttconfvar[@]}"; do
		theval=${!mqttconfvar[$mq]}
		declare o${mqttconfvar[$mq]}
		declare ${mqttconfvar[$mq]}

		tempnewname=${mqttconfvar[$mq]}

		tempoldname=o${mqttconfvar[$mq]}
		tempoldname=$(<ramdisk/mqtt"${mqttconfvar[$mq]}")
		tempnewname="${mqttconfvar[$mq]}"
		if [[ "$tempoldname" != "$theval" ]]; then
			tempPubList="${tempPubList}\nopenWB/${mq}=${theval}"
			echo $theval > ramdisk/mqtt${mqttconfvar[$mq]}
		fi
	done

	tempPubList="${tempPubList}\nopenWB/system/Uptime=$(uptime)"
	tempPubList="${tempPubList}\nopenWB/system/Date=$(date)"
	tempPubList="${tempPubList}\nopenWB/system/Timestamp=${timestamp}"

	echo -e "$tempPubList" | python3 runs/mqttpub.py -q 0 -r &
	runs/pubmqtt.sh &

}