Merge pull request #92096 from mburke5678/mco-butane-version-415

mburke5678 · web-flow · commit ce31b7c31c6c · 2025-04-11T09:52:31.000-04:00
[enterprise-4.15] OCP MC docs don't highlight that Butane .version is different than z-stream OCP version
diff --git a/modules/cluster-logging-systemd-scaling.adoc b/modules/cluster-logging-systemd-scaling.adoc
@@ -22,7 +22,7 @@ and other settings.
 +
 [NOTE]
 ====
-See "Creating machine configs with Butane" for information about Butane.
+include::snippets/butane-version.adoc[]
 ====
 +
 [source,yaml,subs="attributes+"]
diff --git a/modules/containers-signature-verify-enable.adoc b/modules/containers-signature-verify-enable.adoc
@@ -13,7 +13,7 @@ Enabling container signature validation for Red Hat Container Registries require
 +
 [NOTE]
 ====
-See "Creating machine configs with Butane" for information about Butane.
+include::snippets/butane-version.adoc[]
 ====
 +
 [source,yaml,subs="attributes+"]
diff --git a/modules/installation-special-config-chrony.adoc b/modules/installation-special-config-chrony.adoc
@@ -32,7 +32,7 @@ to your nodes as a machine config.
 +
 [NOTE]
 ====
-See "Creating machine configs with Butane" for information about Butane.
+include::snippets/butane-version.adoc[]
 ====
 +
 [source,yaml,subs="attributes+"]
diff --git a/modules/machineconfig-modify-journald.adoc b/modules/machineconfig-modify-journald.adoc
@@ -21,7 +21,7 @@ This procedure describes how to modify `journald` rate limiting settings in the
 +
 [NOTE]
 ====
-See "Creating machine configs with Butane" for information about Butane.
+include::snippets/butane-version.adoc[]
 ====
 +
 [source,yaml,subs="attributes+"]
diff --git a/modules/nw-cluster-mtu-change.adoc b/modules/nw-cluster-mtu-change.adoc
@@ -141,6 +141,11 @@ where:
 
 .... Create the following Butane config in the `control-plane-interface.bu` file:
 +
+[NOTE]
+====
+include::snippets/butane-version.adoc[]
+====
++
 [source,yaml, subs="attributes+"]
 ----
 variant: openshift
@@ -161,6 +166,11 @@ storage:
 
 .... Create the following Butane config in the `worker-interface.bu` file:
 +
+[NOTE]
+====
+include::snippets/butane-version.adoc[]
+====
++
 [source,yaml, subs="attributes+"]
 ----
 variant: openshift
diff --git a/modules/nw-ovn-ipsec-north-south-enable.adoc b/modules/nw-ovn-ipsec-north-south-enable.adoc
@@ -121,6 +121,11 @@ $ oc create -f ipsec-config.yaml
 
 .. To create Butane config files for the control plane and worker nodes, enter the following command:
 +
+[NOTE]
+====
+include::snippets/butane-version.adoc[]
+====
++
 [source,terminal,subs="attributes+"]
 ----
 $ for role in master worker; do
diff --git a/modules/rhcos-load-firmware-blobs.adoc b/modules/rhcos-load-firmware-blobs.adoc
@@ -14,10 +14,10 @@ Because the default location for firmware blobs in `/usr/lib` is read-only, you
 +
 [NOTE]
 ====
-See "Creating machine configs with Butane" for information about Butane.
+include::snippets/butane-version.adoc[]
 ====
-.Butane config file for custom firmware blob
 +
+.Butane config file for custom firmware blob
 [source,yaml,subs="attributes+"]
 ----
 variant: openshift
diff --git a/modules/troubleshooting-enabling-kdump-day-one.adoc b/modules/troubleshooting-enabling-kdump-day-one.adoc
@@ -25,6 +25,11 @@ Create a `MachineConfig` object for cluster-wide configuration:
 
 . Create a Butane config file, `99-worker-kdump.bu`, that configures and enables kdump:
 +
+[NOTE]
+====
+include::snippets/butane-version.adoc[]
+====
++
 [source,yaml,subs="attributes+"]
 ----
 variant: openshift
diff --git a/modules/virt-binding-devices-vfio-driver.adoc b/modules/virt-binding-devices-vfio-driver.adoc
@@ -28,7 +28,7 @@ $ lspci -nnv | grep -i nvidia
 +
 [NOTE]
 ====
-See "Creating machine configs with Butane" for information about Butane.
+include::snippets/butane-version.adoc[]
 ====
 +
 .Example
diff --git a/snippets/butane-version.adoc b/snippets/butane-version.adoc
@@ -0,0 +1,17 @@
+// Text snippet included in the following modules:
+//
+// * modules/about-crio.adoc
+// * modules/nodes-containers-using.adoc
+// * modules/cluster-logging-systemd-scaling.adoc
+// * modules/containers-signature-verify-enable.adoc
+// * modules/machineconfig-modify-journald.adoc
+// * modules/nw-cluster-mtu-change.adoc
+// * modules/nw-ovn-ipsec-north-south-enable.adoc
+// * modules/rhcos-load-firmware-blobs.adoc
+// * modules/troubleshooting-enabling-kdump-day-one.adoc
+// * modules/virt-binding-devices-vfio-driver.adoc
+// * updating/updating_a_cluster/updating-bootloader-rhcos.adoc
+
+:_mod-docs-content-type: SNIPPET
+
+The link:https://coreos.github.io/butane/specs/[Butane version] you specify in the config file should match the {product-title} version and always ends in `0`. For example, `{product-version}.0`. See "Creating machine configs with Butane" for information about Butane.
diff --git a/updating/updating_a_cluster/updating-bootloader-rhcos.adoc b/updating/updating_a_cluster/updating-bootloader-rhcos.adoc
@@ -90,7 +90,7 @@ The boot loader update operation generally completes quickly thus the risk is lo
 +
 [NOTE]
 ====
-See "Creating machine configs with Butane" for information about Butane.
+include::snippets/butane-version.adoc[]
 ====
 +
 .Example output

Original file line number	Diff line number	Diff line change
`@@ -22,7 +22,7 @@ and other settings.`
`22`	`22`	`+`
`23`	`23`	`[NOTE]`
`24`	`24`	`====`
`25`		`-See "Creating machine configs with Butane" for information about Butane.`
	`25`	`+include::snippets/butane-version.adoc[]`
`26`	`26`	`====`
`27`	`27`	`+`
`28`	`28`	`[source,yaml,subs="attributes+"]`
Original file line number	Diff line number	Diff line change
`@@ -13,7 +13,7 @@ Enabling container signature validation for Red Hat Container Registries require`
`13`	`13`	`+`
`14`	`14`	`[NOTE]`
`15`	`15`	`====`
`16`		`-See "Creating machine configs with Butane" for information about Butane.`
	`16`	`+include::snippets/butane-version.adoc[]`
`17`	`17`	`====`
`18`	`18`	`+`
`19`	`19`	`[source,yaml,subs="attributes+"]`
Original file line number	Diff line number	Diff line change
`@@ -32,7 +32,7 @@ to your nodes as a machine config.`
`32`	`32`	`+`
`33`	`33`	`[NOTE]`
`34`	`34`	`====`
`35`		`-See "Creating machine configs with Butane" for information about Butane.`
	`35`	`+include::snippets/butane-version.adoc[]`
`36`	`36`	`====`
`37`	`37`	`+`
`38`	`38`	`[source,yaml,subs="attributes+"]`
Original file line number	Diff line number	Diff line change
@@ -21,7 +21,7 @@ This procedure describes how to modify `journald` rate limiting settings in the
`21`	`21`	`+`
`22`	`22`	`[NOTE]`
`23`	`23`	`====`
`24`		`-See "Creating machine configs with Butane" for information about Butane.`
	`24`	`+include::snippets/butane-version.adoc[]`
`25`	`25`	`====`
`26`	`26`	`+`
`27`	`27`	`[source,yaml,subs="attributes+"]`
Original file line number	Diff line number	Diff line change
@@ -14,10 +14,10 @@ Because the default location for firmware blobs in `/usr/lib` is read-only, you
`14`	`14`	`+`
`15`	`15`	`[NOTE]`
`16`	`16`	`====`
`17`		`-See "Creating machine configs with Butane" for information about Butane.`
	`17`	`+include::snippets/butane-version.adoc[]`
`18`	`18`	`====`
`19`		`-.Butane config file for custom firmware blob`
`20`	`19`	`+`
	`20`	`+.Butane config file for custom firmware blob`
`21`	`21`	`[source,yaml,subs="attributes+"]`
`22`	`22`	`----`
`23`	`23`	`variant: openshift`
Original file line number	Diff line number	Diff line change
`@@ -28,7 +28,7 @@ $ lspci -nnv \| grep -i nvidia`
`28`	`28`	`+`
`29`	`29`	`[NOTE]`
`30`	`30`	`====`
`31`		`-See "Creating machine configs with Butane" for information about Butane.`
	`31`	`+include::snippets/butane-version.adoc[]`
`32`	`32`	`====`
`33`	`33`	`+`
`34`	`34`	`.Example`
Original file line number	Diff line number	Diff line change
`@@ -90,7 +90,7 @@ The boot loader update operation generally completes quickly thus the risk is lo`
`90`	`90`	`+`
`91`	`91`	`[NOTE]`
`92`	`92`	`====`
`93`		`-See "Creating machine configs with Butane" for information about Butane.`
	`93`	`+include::snippets/butane-version.adoc[]`
`94`	`94`	`====`
`95`	`95`	`+`
`96`	`96`	`.Example output`