rpi-update

#!/bin/bash

set -o nounset
set -o errexit

for i in $*; do
  if [[ $i == -* ]]; then
    echo "rpi-update does not accept command line dash parameters."
    echo "See: https://github.com/raspberrypi/rpi-update/blob/master/README.md"
    exit 1
  fi
done

# REPO_URI variable is here for backwards-compatibility
REPO_URI=${REPO_URI:-"https://github.com/raspberrypi/rpi-firmware"}
FIRMWARE_REPO_URI=${FIRMWARE_REPO_URI:-$REPO_URI}
FIRMWARE_REPO_API_URI=${FIRMWARE_REPO_URI/github.com/api.github.com\/repos}
FIRMWARE_REPO_CONTENT_URI=${FIRMWARE_REPO_URI/github.com/raw.githubusercontent.com}

BOOTLOADER_REPO_URI=${BOOTLOADER_REPO_URI:-"https://github.com/raspberrypi/rpi-eeprom"}
BOOTLOADER_REPO_API_URI=${BOOTLOADER_REPO_URI/github.com/api.github.com\/repos}
BOOTLOADER_REPO_CONTENT_URI=${BOOTLOADER_REPO_URI/github.com/raw.githubusercontent.com}

LINUX_REPO_URI=${LINUX_REPO_URI:-"https://github.com/raspberrypi/linux"}
LINUX_REPO_API_URI=${LINUX_REPO_URI/github.com/api.github.com\/repos}

UPDATE_SELF=${UPDATE_SELF:-1}
UPDATE_REPO_URI=${UPDATE_REPO_URI:-"https://github.com/raspberrypi/rpi-update"}
UPDATE_REPO_CONTENT_URI=${UPDATE_REPO_URI/github.com/raw.githubusercontent.com}
UPDATE_URI="${UPDATE_REPO_CONTENT_URI}/master/rpi-update"

if [[ "${BOOT_PATH:-"unset"}" == "unset" && "${ROOT_PATH:-"unset"}" != "unset" ]] ||
[[ "${BOOT_PATH:-"unset"}" != "unset" && "${ROOT_PATH:-"unset"}" == "unset" ]]; then
	echo " *** You need to specify both ROOT_PATH and BOOT_PATH, or neither"
	exit 1
fi

if [[ "${BOOT_PATH:-"unset"}" == "unset" ]]; then
	NOOBS_CHECK=${NOOBS_CHECK:-1}
else
	NOOBS_CHECK=${NOOBS_CHECK:-0}
fi

ROOT_PATH=${ROOT_PATH:-"/"}
if command -v vcgencmd > /dev/null; then
	CUR_FW_SUBDIR="/$(echo =$(vcgencmd get_config os_prefix) | cut -d'=' -f3)"
else
	CUR_FW_SUBDIR="/"
fi
FW_SUBDIR=${FW_SUBDIR:-${CUR_FW_SUBDIR}}
if [[ "${FW_SUBDIR}" != "" ]]; then
	if [[ "${FW_SUBDIR::1}" != "/" ]]; then
		FW_SUBDIR="/$FW_SUBDIR"
	fi
	if [[ "${FW_SUBDIR: -1}" == "/" ]]; then
		FW_SUBDIR=${FW_SUBDIR: : -1}
	fi
fi
if mountpoint -q /boot/firmware ; then
        BOOT_PATH=${BOOT_PATH:-"/boot/firmware"}
else
        BOOT_PATH=${BOOT_PATH:-"/boot"}
fi
WORK_PATH=${WORK_PATH:-"${ROOT_PATH}/root"}
SKIP_KERNEL=${SKIP_KERNEL:-}
SKIP_BOOTLOADER=${SKIP_BOOTLOADER:-0}
SKIP_FIRMWARE=${SKIP_FIRMWARE:-0}
SKIP_SDK=${SKIP_SDK:-0}
SKIP_VCLIBS=${SKIP_VCLIBS:-0}
SKIP_REPODELETE=${SKIP_REPODELETE:-0}
SKIP_BACKUP=${SKIP_BACKUP:-0}
SKIP_DOWNLOAD=${SKIP_DOWNLOAD:-0}
SKIP_WARNING=${SKIP_WARNING:-0}
SKIP_CHECK_PARTITION=${SKIP_CHECK_PARTITION:-0}
WANT_SYMVERS=${WANT_SYMVERS:-0}
PRUNE_MODULES=${PRUNE_MODULES:-0}
RPI_UPDATE_UNSUPPORTED=${RPI_UPDATE_UNSUPPORTED:-0}
JUST_CHECK=${JUST_CHECK:-0}
RPI_REBOOT=${RPI_REBOOT:-0}
CURL_OPTIONS=${CURL_OPTIONS:-""}
GITHUB_API_TOKEN=${GITHUB_API_TOKEN:-""}
# REDIRECTOR variable is here for backwards-compatibility
REDIRECTOR=${REDIRECTOR:-"https://builds.raspberrypi.com/github/linux"}
REDIRECTOR_URI=${REDIRECTOR_URI:-$REDIRECTOR}

FW_REPO="${REPO_URI}.git"
FW_REPOLOCAL=${FW_REPOLOCAL:-"${WORK_PATH}/.rpi-firmware"}
FW_PATH="${BOOT_PATH}${FW_SUBDIR}"
FW_MODPATH="${ROOT_PATH}/lib/modules"
FW_REV_IN=${1:-""}
FW_REVFILE="${FW_PATH}/.firmware_revision"
SELFUPDATE_SCRIPT="${WORK_PATH}/.updateScript.sh"
BOOTLOADER_REV_IN=${2:-""}
BOOTLOADER_REVFILE="${FW_PATH}/.bootloader_revision"

[ "${RPI_UPDATE_UNSUPPORTED}" -ne 0 ] && echo -e "You appear to be trying to update firmware on an incompatible distribution. To force update, run the following:\nsudo -E RPI_UPDATE_UNSUPPORTED=0 rpi-update" && exit 1

if [[ "$SKIP_KERNEL" == "" ]]; then
	SKIP_KERNEL=0
	if command -v vcgencmd > /dev/null; then
		KERNEL=$(vcgencmd get_config str | grep -E "^kernel=" | cut -d= -f2)
		case $KERNEL in
			"" | kernel8_rt.img | kernel8.img | kernel_2712.img) ;;
			*) echo -e "You appear to be using a custom kernel file (kernel=$KERNEL in config.txt).\nSkipping installation of new kernel, as bundled dtb files may be incompatible with your kernel." && SKIP_KERNEL=1
			sleep 1
		esac
	fi
fi

# Always follow redirects
CURL_OPTIONS="${CURL_OPTIONS} -L"

# api.github.com requires a User-Agent header
CURL_OPTIONS_API="${CURL_OPTIONS_API:-"-A curl"}"

# Support for custom GitHub Auth Tokens
if [[ -n "${GITHUB_API_TOKEN}" ]]; then
	echo " *** Using GitHub token for all requests."
	CURL_OPTIONS_API="${CURL_OPTIONS_API} --header \"Authorization: token ${GITHUB_API_TOKEN}\""
fi

GITHUB_API_LIMITED=$(eval curl ${CURL_OPTIONS_API} -s ${CURL_OPTIONS} "https://api.github.com/rate_limit" | tr -d "," | awk 'BEGIN {reset=0;} { if ($1 == "\"limit\":") limit=$2; else if ($1 == "\"remaining\":") remaining=$2; else if ($1 == "\"reset\":" && limit>0 && remaining==0) reset=$2;} END { print reset }')
if [ ${GITHUB_API_LIMITED} -gt 0 ]; then
	echo " *** Github API is currently rate limited - please try again after $(date --date @${GITHUB_API_LIMITED})"
	exit 1
fi


function update_self() {
	echo " *** Performing self-update"
	local _tempFileName="$0.tmp"

	if ! eval curl -fs ${CURL_OPTIONS} --output "${_tempFileName}" "${UPDATE_URI}"; then
		echo " !!! Failed to download update for rpi-update!"
		echo " !!! Make sure you are connected to the internet, have ca-certificates installed and that the time is set correctly"
		exit 1
	fi

	if [[ "$(head -1 ${_tempFileName})" != '#!/bin/bash' ]]; then
		echo " !!! Failed to download update for rpi-update!"
		echo " !!! Contents of file is not as expected - github may be down"
		exit 1
	fi

	local OCTAL_MODE=$(stat -c '%a' "$0")
	if ! chmod ${OCTAL_MODE} "${_tempFileName}" ; then
		echo " !!! Failed: Error while trying to set mode on ${_tempFileName}"
		exit 1
	fi

	cat > "${SELFUPDATE_SCRIPT}" << EOF
	if mv "${_tempFileName}" "$0"; then
		rm -- "\$0"
		exec env UPDATE_SELF=0 /bin/bash "$0" "${FW_REV_IN}" "${BOOTLOADER_REV_IN}"
	else
		echo " !!! Failed!"
	fi
EOF

	echo " *** Relaunching after update"
	exec /bin/bash "${SELFUPDATE_SCRIPT}"
}

function update_modules {
	if [[ ${SKIP_KERNEL} -eq 0 ]]; then
		echo " *** Updating kernel modules"
		find "${FW_REPOLOCAL}/modules" -mindepth 1 -maxdepth 1 -type d | while read DIR; do
			BASEDIR=$(basename "${DIR}")
			rm -rf "${FW_MODPATH}/${BASEDIR}/kernel"
		done

		if [[ ${PRUNE_MODULES} -ne 0 ]]; then
			find "${FW_MODPATH}" -mindepth 1 -maxdepth 1 -type d | while read DIR; do
				COUNT=$(find "${DIR}" -type f ! \( -name '*.ko' -o -name '*.ko.xz' -o -name 'modules.*' \) | wc -l);
				if [[ ${COUNT} -eq 0 ]]; then
					echo "Pruning ${DIR}"
					rm -rf "${DIR}"
				else
					echo "Keeping ${DIR}"
				fi
			done
		fi

		find "${FW_REPOLOCAL}/modules" -mindepth 1 -maxdepth 1 -type d | while read DIR; do
			BASEDIR="$(basename "${DIR}")"
			# get the v7l from 5.15.78-v7l+ and null from 5.15.78+
			VERSION=$(echo $BASEDIR | cut -sd "-" -f2)
			if [[ ${WANT_32BIT} -ne 1 ]]; then
				if [[ "${VERSION}" == "" ]] || [[ "${VERSION}" == "v7+" ]] || [[ "${VERSION}" == "v7l+" ]]; then
					continue;
				fi
			fi
			if [[ ${WANT_64BIT} -ne 1 ]]; then
				if [[ "${VERSION}" == "v8+" ]]; then
					continue;
				fi
			fi
			if [[ ${WANT_64BIT_RT} -ne 1 ]]; then
				if [[ "${VERSION}" == "v8-rt+" ]]; then
					continue;
				fi
			fi
			if [[ ${WANT_PI4} -ne 1 ]]; then
				if [[ "${VERSION}" == "v7l+" ]]; then
					continue;
				fi
			fi
			if [[ ${WANT_PI5} -ne 1 ]]; then
				if [[ "${VERSION}" == "v8_16k+" ]]; then
					continue;
				fi
			fi
			cp -R "${DIR}" "${FW_MODPATH}/"
			echo " *** depmod ${BASEDIR}"
			depmod -b "${ROOT_PATH}" -a "${BASEDIR}"
		done
	else
		echo " *** As requested, not updating kernel modules"
	fi
}

function update_vc_libs {
	if [[ ${SKIP_VCLIBS} -eq 0 ]]; then
		echo " *** Updating VideoCore libraries"
	else
		echo " *** As requested, not updating VideoCore libraries"
		return
	fi

	if [[ -e ${ROOT_PATH}/bin/sh ]]; then
		local ELFOUTPUT=$(readelf -a "${ROOT_PATH}/bin/sh"; readelf -h "${ROOT_PATH}/bin/sh")
	else
		local ELFOUTPUT="VFP_args"
	fi
	if [[ "${ELFOUTPUT}" != "${ELFOUTPUT/VFP_args/}" || \
			"${ELFOUTPUT}" != "${ELFOUTPUT/hard-float/}" ]]; then
		if [ -d "${FW_REPOLOCAL}/vc/hardfp/" ]; then
			echo " *** Using HardFP libraries"
			cp -R "${FW_REPOLOCAL}/vc/hardfp/"* "${ROOT_PATH}/"
		fi
	else
		if [ -d "${FW_REPOLOCAL}/vc/softfp/" ]; then
			echo " *** Using SoftFP libraries"
			cp -R "${FW_REPOLOCAL}/vc/softfp/"* "${ROOT_PATH}/"
		fi
	fi
}

function update_sdk {
	if [[ ${SKIP_SDK} -eq 0 ]]; then
		if [ -d "${FW_REPOLOCAL}/vc/sdk/" ]; then
			echo " *** Updating SDK"
			cp -R "${FW_REPOLOCAL}/vc/sdk/"* "${ROOT_PATH}/"
		fi
	else
		echo " *** As requested, not updating SDK"
	fi
}

function download_bootloader_tools {
	for tool in rpi-eeprom-update rpi-eeprom-config rpi-eeprom-digest; do
		temp="$(mktemp)"
		if ! eval curl -fs ${CURL_OPTIONS} "${BOOTLOADER_REPO_CONTENT_URI}/${BOOTLOADER_REV}/${tool}" --output "${temp}"; then
			echo " !!! Failed to download ${tool}"
			rm -f "${temp}"
			exit 1
		fi
		mv "${temp}" "/usr/bin/${tool}"
		chmod a+rx "/usr/bin/${tool}"
	done
}

function download_bootloader_images {
	bcm_chip=$1
	latest_eeprom=$(eval curl ${CURL_OPTIONS_API} -fs ${CURL_OPTIONS} ${BOOTLOADER_REPO_API_URI}/git/trees/${BOOTLOADER_REV}?recursive=1 | grep "firmware-${bcm_chip}/latest/pieeprom" | sed 's/.*\(pieeprom.*\)".*/\1/' | sort -r | head -n1)
	if [[ -n "${latest_eeprom}" ]]; then
		fw_path="/lib/firmware/raspberrypi/bootloader-${bcm_chip}/latest"
		if [[ ! -d "${fw_path}" ]]; then
			echo "Path ${fw_path} not found. Please install the rpi-eeprom package first"
			exit 1
		fi
		if [[ "${BOOTLOADER_REV_IN}" != "master" ]]; then
			echo "Non default bootloader revision specified (${BOOTLOADER_REV_IN}) deleting local bootloader binaries in ${fw_path}"
			rm -f "${fw_path}/recovery.bin"
			rm -f "${fw_path}"/pieeprom*.bin
		fi
		if [[ ! -f "${fw_path}/${latest_eeprom}" ]]; then
			eeprom_temp="$(mktemp)"
			if ! eval curl -fs ${CURL_OPTIONS} "${BOOTLOADER_REPO_CONTENT_URI}/${BOOTLOADER_REV}/firmware-${bcm_chip}/latest/${latest_eeprom}" --output "${eeprom_temp}"; then
				echo " !!! Failed to download firmware-${bcm_chip}/${latest_eeprom}"
				rm -rf "${eeprom_temp}"
				exit 1
			fi
			mv "${eeprom_temp}" "${fw_path}/${latest_eeprom}"
			chmod a+r "${fw_path}/${latest_eeprom}"
		fi

		# Always download the latest recovery.bin if bootloader_rev has changed.
		recovery_temp="$(mktemp)"
		if ! eval curl -fs ${CURL_OPTIONS} "${BOOTLOADER_REPO_CONTENT_URI}/${BOOTLOADER_REV}/firmware-${bcm_chip}/latest/recovery.bin" --output "${recovery_temp}"; then
			echo " !!! Failed to download ${bcm_chip}/recovery.bin"
			rm -rf "${recovery_temp}"
			exit 1
		fi
		mv "${recovery_temp}" "${fw_path}/recovery.bin"
		chmod a+r "${fw_path}/recovery.bin"
	fi
}

function download_bootloader {
	if [[ ${SKIP_BOOTLOADER} -eq 0 ]]; then
		echo "Downloading bootloader tools"
		download_bootloader_tools

		echo "Downloading bootloader images"
		if grep -q "bcm2711" /proc/device-tree/compatible; then
			download_bootloader_images 2711
		fi
		if grep -q "bcm2712" /proc/device-tree/compatible; then
			download_bootloader_images 2712
		fi
	fi
}

function update_bootloader {
	if [[ ${SKIP_BOOTLOADER} -eq 0 ]]; then
		if grep -q "bcm2712" /proc/device-tree/compatible; then
			# Prefer flashrom on BCM2712. rpi-eeprom-update will failover to recovery.bin
			# if flashrom is not installed.
			export RPI_EEPROM_USE_FLASHROM=${RPI_EEPROM_USE_FLASHROM:-1}
		fi
		sed /etc/default/rpi-eeprom-update -i -e "s/^FIRMWARE_RELEASE_STATUS.*/FIRMWARE_RELEASE_STATUS=\"latest\"/"
		if [[ "${BOOTLOADER_REV_IN}" != "master" ]]; then
			# Use latest according to rpi-eeprom git hash
			echo "Using latest bootloader from rpi-eeprom ${BOOTLOADER_REV_IN}"
			config_temp="$(mktemp)"
			if ! rpi-eeprom-config > "${config_temp}"; then
				echo "Failed to read current bootloader config"
				exit 1
			fi
			if ! rpi-eeprom-config -a "${config_temp}"; then
				echo "Failed to update bootloader - rpi-eeprom-rev ${BOOTLOADER_REV_IN}"
				exit 1
			fi
			rm -f "${config_temp}"
		else
			# Update if newer
			rpi-eeprom-update -a
		fi
	fi
}

function show_notice {
	local NOTICE_URI=${FIRMWARE_REPO_CONTENT_URI}/${FW_REV}/NOTICE.md
	local FULL_NOTICE=$(eval curl -fs ${CURL_OPTIONS} "${NOTICE_URI}")
	if [ -z "${FULL_NOTICE}" ]; then
		return
	fi
	local NOTICE_HASH_HEAD=$(echo "${FULL_NOTICE}" | head -1)
	if [ "$(echo "${NOTICE_HASH_HEAD}" | awk -F: '{print $1}')" == "HASH" ]; then
		local NOTICE_HASH_EXISTS=true
		local NOTICE_HASH=$(echo "${NOTICE_HASH_HEAD}" | awk '{print $2}')
	else
		local NOTICE_HASH_EXISTS=false
	fi
	if ${NOTICE_HASH_EXISTS}; then
		local NOTICE=$(echo "${FULL_NOTICE}" | tail -n+2)
		local NEW_HASH=${FW_REV}
		local LOCAL_lt_NOTICE=$(compare_hashes "${FIRMWARE_REPO_API_URI}" "${LOCAL_HASH}" lt "${NOTICE_HASH}")
		local NEW_ge_NOTICE=$(compare_hashes "${FIRMWARE_REPO_API_URI}" "${NEW_HASH}" ge "${NOTICE_HASH}")
		if ! ${LOCAL_lt_NOTICE} && ! ${NEW_ge_NOTICE}; then
			return
		fi
	else
		local NOTICE=${FULL_NOTICE}
	fi
	echo "${NOTICE}"
	if ! echo "${NOTICE}" | grep -q WARNING; then
		return
	fi
	if [[ ${SKIP_WARNING} -ne 0 ]]; then
		return
	fi
	read -p "Would you like to proceed? (y/N)" -n 1 -r -s
	echo ""
	if ! [[ $REPLY =~ ^[Yy]$ ]]; then
		exit 1;
	fi
}

function check_partition {
	mbs=$1
	if [[ ${SKIP_CHECK_PARTITION} -ne 0 ]]; then
		return
	fi
	local PARTSIZE=0
	if command -v df > /dev/null 2>&1 ; then
		local M=$(df -P ${BOOT_PATH} | awk 'END{print $1}')
		if [[ $M == /dev/* ]]; then
			if command -v lsblk > /dev/null 2>&1 ; then
				PARTSIZE=$(lsblk -bno SIZE ${M})
			fi
		fi
	fi
	if [ $PARTSIZE -ne 0 ] && [ $PARTSIZE -lt $(( mbs*1024*1024 )) ]; then
		echo "Partition size $(( $PARTSIZE >> 20 ))M may not be sufficient for all firmware files"
		echo "This could result in a system that will not boot."
		echo "${mbs}M FAT partition is recommended. Ensure you have a backup if continuing."
		if [[ ${SKIP_WARNING} -ne 0 ]]; then
			return
		fi
		read -p "Would you like to proceed? (y/N)" -n 1 -r -s
		echo ""
		if ! [[ $REPLY =~ ^[Yy]$ ]]; then
			exit 1;
		fi
	fi
}

function check_initramfs {
	local INITRAMFS=""
	if command -v vcgencmd > /dev/null; then
		INITRAMFS="$(echo =$(vcgencmd get_config ramfsfile) | cut -d'=' -f3)"
	fi
	if [ "$INITRAMFS" == "" ]; then
		return
	fi
	if [[ ${SKIP_WARNING} -ne 0 ]]; then
		return
	fi
	echo "Updating a system with initramfs configured is not supported by rpi-update"
	echo "This could result in a system that will not boot."
	read -p "Would you like to proceed? (y/N)" -n 1 -r -s
	echo ""
	if ! [[ $REPLY =~ ^[Yy]$ ]]; then
		exit 1;
	fi
}


function update_firmware {
	if [[ ${SKIP_FIRMWARE} -eq 0 ]]; then
		echo " *** Updating firmware"
		rm -rf "${FW_PATH}/"start*.elf
		rm -rf "${FW_PATH}/"fixup*.dat
		rm -rf "${FW_PATH}/"bootcode.bin
		if [[ ${WANT_PI4} -eq 1 ]]; then
			cp "${FW_REPOLOCAL}/"start*.elf "${FW_PATH}/"
			cp "${FW_REPOLOCAL}/"fixup*.dat "${FW_PATH}/"
		else
			cp "${FW_REPOLOCAL}/"start{,[^4]*}.elf "${FW_PATH}/"
			cp "${FW_REPOLOCAL}/"fixup{,[^4]*}.dat "${FW_PATH}/"
		fi
		cp "${FW_REPOLOCAL}/"*.bin "${FW_PATH}/"
	fi
	if [[ ${SKIP_KERNEL} -eq 0 ]]; then
		if [[ ${WANT_32BIT} -eq 1 ]]; then
			[[ -e "${FW_REPOLOCAL}/"kernel.img ]] && cp "${FW_REPOLOCAL}/"kernel.img "${FW_PATH}/"
			[[ -e "${FW_REPOLOCAL}/"kernel7.img ]] && cp "${FW_REPOLOCAL}/"kernel7.img "${FW_PATH}/"
			if [[ ${WANT_PI4} -eq 1 ]]; then
				[[ -e "${FW_REPOLOCAL}/"kernel7l.img ]] && cp "${FW_REPOLOCAL}/"kernel7l.img "${FW_PATH}/"
			fi
		fi
		if [[ ${WANT_64BIT} -eq 1 ]]; then
			[[ -e "${FW_REPOLOCAL}/"kernel8.img ]] && cp "${FW_REPOLOCAL}/"kernel8.img "${FW_PATH}/"
		fi
		if [[ ${WANT_64BIT_RT} -eq 1 ]]; then
			[[ -e "${FW_REPOLOCAL}/"kernel8_rt.img ]] && cp "${FW_REPOLOCAL}/"kernel8_rt.img "${FW_PATH}/"
		fi
		if [[ ${WANT_PI5} -eq 1 ]]; then
			[[ -e "${FW_REPOLOCAL}/"kernel_2712.img ]] && cp "${FW_REPOLOCAL}/"kernel_2712.img "${FW_PATH}/"
			[[ -e "${FW_REPOLOCAL}/"kernel2712.img ]] && cp "${FW_REPOLOCAL}/"kernel2712.img "${FW_PATH}/"kernel_2712.img
		fi
		if [[ -n $(shopt -s nullglob; echo "${FW_REPOLOCAL}/"*.dtb*) ]]; then
			cp "${FW_REPOLOCAL}/"*.dtb* "${FW_PATH}/"
		fi
		if [[ -n $(shopt -s nullglob; echo "${FW_REPOLOCAL}/overlays/"*.dtb*) ]]; then
			mkdir -p "${FW_PATH}/overlays"
			cp "${FW_REPOLOCAL}/overlays/"*.dtb* "${FW_PATH}/overlays/"
			if [[ -f "${FW_REPOLOCAL}/overlays/README" ]]; then
				cp "${FW_REPOLOCAL}/overlays/README" "${FW_PATH}/overlays/"
			fi
		fi
	else
		echo " *** As requested, not updating kernel"
	fi
	if [[ ${WANT_SYMVERS} -ne 0 ]]; then
		if [[ -f "${FW_REPOLOCAL}/Module.symvers" ]]; then
			cp "${FW_REPOLOCAL}/Module.symvers" "${FW_PATH}/"
		fi
		if [[ -f "${FW_REPOLOCAL}/Module7.symvers" ]]; then
			cp "${FW_REPOLOCAL}/Module7.symvers" "${FW_PATH}/"
		fi
		if [[ -f "${FW_REPOLOCAL}/git_hash" ]]; then
			cp "${FW_REPOLOCAL}/git_hash" "${FW_PATH}/"
		fi
	fi
}

function finalise {
	if [[ -f "${FW_PATH}/arm192_start.elf" ]]; then
		echo " *** Setting 192M ARM split"
		cp "${FW_PATH}/arm192_start.elf" "${FW_PATH}/start.elf"
	fi
	if [[ -e ${ROOT_PATH}/etc ]]; then
		echo " *** Running ldconfig"
		ldconfig -r "${ROOT_PATH}"
	fi
	echo " *** Storing current firmware revision"
	echo "${FW_REV}" > "${FW_REVFILE}"
	echo "${BOOTLOADER_REV}" > "${BOOTLOADER_REVFILE}"
}

function do_backup {
	if [[ ${SKIP_BACKUP} -eq 0 ]]; then
		echo " *** Backing up files (this will take a few minutes)"
		local OLD_FW_PATH="${BOOT_PATH}.bak"
		if [[ -d "${OLD_FW_PATH}" ]]; then
			echo " *** Remove old firmware backup"
			rm -rf "${OLD_FW_PATH}"
		fi
		echo " *** Backing up firmware"
		cp -a "${FW_PATH}" "${OLD_FW_PATH}"
		if [[ ${SKIP_KERNEL} -eq 0 ]]; then
			OLD_FW_MODPATH=${FW_MODPATH}.bak
			if [[ -d "${OLD_FW_MODPATH}" ]]; then
				echo " *** Remove old modules backup"
				rm -rf "${OLD_FW_MODPATH}"
			fi
			echo " *** Backing up modules $(uname -r)"
			local CURRENT_FW_MODPATH=${FW_MODPATH}/$(uname -r)
			if [[ -d "${CURRENT_FW_MODPATH}" ]]; then
				mkdir -p "${OLD_FW_MODPATH}" && cp -a "${CURRENT_FW_MODPATH}" "${OLD_FW_MODPATH}"
			fi
		fi
	fi
}

function do_update {
	if [ -f ${FW_PATH}/kernel.img ] || [ -f ${FW_PATH}/kernel7.img ]; then
		WANT_32BIT=${WANT_32BIT:-1}
	fi
	if [ -f ${FW_PATH}/kernel7l.img ]; then
		WANT_32BIT=${WANT_32BIT:-1}
	fi
	if [ -f ${FW_PATH}/kernel8.img ]; then
		WANT_64BIT=${WANT_64BIT:-1}
	fi
	if [ -f ${FW_PATH}/kernel8_rt.img ]; then
		WANT_64BIT_RT=${WANT_64BIT_RT:-1}
	fi
	if [ -f ${FW_PATH}/start4.elf ] || [ -f ${BOOT_PATH}/start4.elf ]; then
		WANT_PI4=${WANT_PI4:-1}
	fi
	if [ -f ${FW_PATH}/kernel_2712.img ]; then
		WANT_PI5=${WANT_PI5:-1}
	fi
	WANT_32BIT=${WANT_32BIT:-0}
	WANT_64BIT=${WANT_64BIT:-0}
	WANT_64BIT_RT=${WANT_64BIT_RT:-0}
	WANT_PI4=${WANT_PI4:-0}
	WANT_PI5=${WANT_PI5:-0}
	echo "WANT_32BIT:${WANT_32BIT} WANT_64BIT:${WANT_64BIT} WANT_64BIT_RT:${WANT_64BIT_RT} WANT_PI4:${WANT_PI4} WANT_PI5:${WANT_PI5}"
	if [[ ${WANT_PI5} -eq 1 ]]; then
		check_partition 512
	elif [[ ${WANT_PI4} -eq 1 ]]; then
		check_partition 256
	fi
	check_initramfs
	show_notice
	download_bootloader
	download_rev
	if [[ -f "${FW_REPOLOCAL}/pre-install" ]]; then
		echo " *** Running pre-install script"
		source "${FW_REPOLOCAL}/pre-install"
	fi
	update_bootloader
	update_firmware
	update_modules
	update_vc_libs
	update_sdk
	finalise
	if [[ -f "${FW_REPOLOCAL}/post-install" ]]; then
		echo " *** Running post-install script"
		source "${FW_REPOLOCAL}/post-install"
	fi
	remove_rev
	echo " *** Syncing changes to disk"
	sync
	echo " *** If no errors appeared, your firmware was successfully updated to ${FW_REV}"
	if [[ "${ROOT_PATH}" == "/" ]]; then
		if [[ ${RPI_REBOOT} -ne 0 ]]; then
			echo " *** Rebooting to activate the new firmware"
			reboot
		else
			echo " *** A reboot is needed to activate the new firmware"
		fi
	fi
}

function download_rev {
	if [[ "${ARTIFACT}" != "" ]]; then
		if [[ -f ${FW_REV_IN} ]]; then
			GET="cat"
		else
			GET="curl ${CURL_OPTIONS}"
		fi
		echo " *** Downloading specific artifact revision (this will take a few minutes)"
		rm -rf "${FW_REPOLOCAL}"
		mkdir -p "${FW_REPOLOCAL}"
		for build in ${BUILD}; do
			if [[ ${FW_REV_IN} != http* ]] && [[ ! -f ${FW_REV_IN} ]]; then
				A="${REDIRECTOR_URI}/${ARTIFACT}/${build}"
			else
				A="${ARTIFACT}"
			fi
			echo "${GET} ${A} | zcat | tar xf - -C ${FW_REPOLOCAL} --strip-components=2"
			if ! eval ${GET} "${A}" | zcat | tar xf - -C "${FW_REPOLOCAL}" --strip-components=2; then
				if [[ ${GET} = curl* ]]; then
					echo Invalid artifact specified. Response: $( ${GET} "${A}" -o /dev/null -w "%{http_code}" ).
				fi
				exit 1
			fi
		done
	elif [[ ${SKIP_DOWNLOAD} -eq 0 ]]; then
		local FW_TARBALL_URI=${FIRMWARE_REPO_URI}/tarball/${FW_REV}
		if ! eval curl -fs ${CURL_OPTIONS} --output /dev/null --head "${FW_TARBALL_URI}"; then
			echo "Invalid git hash specified"
			exit 1
		fi
		echo " *** Downloading specific firmware revision (this will take a few minutes)"
		rm -rf "${FW_REPOLOCAL}"
		mkdir -p "${FW_REPOLOCAL}"
		eval curl ${CURL_OPTIONS} "${FW_TARBALL_URI}" | tar xzf - -C "${FW_REPOLOCAL}" --strip-components=1
	fi
}

function remove_rev {
	echo " *** Deleting downloaded files"
	if [[ ${SKIP_REPODELETE} -eq 0 ]]; then
		rm -rf "${FW_REPOLOCAL}"
	fi
}

function noobs_fix {
	echo " !!! ${BOOT_PATH} appears to contain NOOBS files"
	echo "     This may occur if fstab contains incorrect entries."
	echo "     rpi-update will attempt to correct fstab."
	read -p "Would you like to proceed? (y/N)" -n 1 -r -s
	echo
	if ! [[ $REPLY =~ ^[Yy]$ ]]; then
		exit 1;
	fi

	if ! grep -qE "/dev/mmcblk0p1\s+/boot" "${ROOT_PATH}/etc/fstab"; then
		echo "Unexpected fstab entry"
		exit 1
	fi

	local ROOTNUM=$(cat "/proc/cmdline" | sed -n 's|.*root=/dev/mmcblk0p\([0-9]*\).*|\1|p')
	if [ ! "${ROOTNUM}" ];then
		echo "Could not determine root partition."
		exit 1
	fi
	local BOOT_DEV="/dev/mmcblk0p$((ROOTNUM-1))"
	local ROOT_DEV="/dev/mmcblk0p${ROOTNUM}"
	sed "${ROOT_PATH}/etc/fstab" -e "s|^.*[^#].* / |${ROOT_DEV}  / |;s|^.*[^#].* /boot |${BOOT_DEV}  /boot |"
	read -p "Does this look correct? (y/N)" -n 1 -r -s
	echo
	if ! [[ $REPLY =~ ^[Yy]$ ]]; then
		exit 1;
	fi
	sed "${ROOT_PATH}/etc/fstab" -i -e "s|^.*[^#].* / |${ROOT_DEV}  / |;s|^.*[^#].* /boot |${BOOT_DEV}  /boot |"

	umount "${BOOT_PATH}"
	if [ $? -ne 0 ]; then
		echo "Failed to umount ${BOOT_PATH}. Remount manually and try again."
		exit 1
	else
		mount "/boot"
	fi

}

function get_hash_date {
	local COMMITS_API_URI=${1}/commits/$2
	eval curl ${CURL_OPTIONS_API} -s ${CURL_OPTIONS} "${COMMITS_API_URI}" | grep "date" | head -1 | awk -F\" '{print $4}'
}

function compare_hashes {
	local DATE1=$(get_hash_date "${1}" "$2")
	local DATE2=$(get_hash_date "${1}" "$4")
	if [ $(date -d "${DATE1}" +%s) -$3 $(date -d "${DATE2}" +%s) ]; then
		echo true
	else
		echo false
	fi
}

function get_long_hash {
	# ask github for long version hash
	local COMMITS_API_URI=${1}/commits/$2
	eval curl ${CURL_OPTIONS_API} -s ${CURL_OPTIONS} "${COMMITS_API_URI}" | awk 'BEGIN {hash=""} { if (hash == "" && $1 == "\"sha\":") {hash=substr($2, 2, 40);} } END {print hash}'
}

function print_diffs {
	local DIFF_API_URI="$1"
	SEPARATOR="======================================================"
	eval curl ${CURL_OPTIONS_API} -s ${CURL_OPTIONS} "${DIFF_API_URI}" | awk -v SEPARATOR="${SEPARATOR}" -F\" ' { if ($2 == "commits") {commits=1} if (commits && $2 == "message") {print SEPARATOR "\nCommit: " $4} }' | sed 's/\\n\\n/\nCommit:\ /g'
}


if [[ ${EUID} -ne 0 ]]; then
	echo " !!! This tool must be run as root"
	exit 1
fi

echo " *** Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS and Dom"

if [[ ! -d ${WORK_PATH} ]]; then
	echo " !!! ${WORK_PATH} doesn't exist - creating"
	mkdir -p "${WORK_PATH}"
fi

if [[ ${UPDATE_SELF} -ne 0 ]]; then
	update_self
else
	rm -f "${SELFUPDATE_SCRIPT}"
fi

if [ "${BRANCH:-"unset"}" != "unset" ]; then
  echo 'Using the BRANCH variable is deprecated. Just use "rpi-update <branch>"'.
  exit
fi

if [[ ! -d "${FW_PATH}" ]]; then
	echo " !!! ${FW_PATH} doesn't exist - creating"
	mkdir -p "${FW_PATH}"
fi

if [[ ${SKIP_KERNEL} -eq 0 ]] && [[ ! -d "${FW_MODPATH}" ]]; then
	echo " !!! ${FW_MODPATH} doesn't exist - creating"
	mkdir -p "${FW_MODPATH}"
fi

if [[ ${NOOBS_CHECK} -eq 1 ]] && [[ -f "${BOOT_PATH}/recovery.elf" ]]; then
	noobs_fix
fi

command -v readelf >/dev/null 2>&1 || {
	echo " !!! This tool requires you have readelf installed, please install it first"
	echo "     In Debian, try: sudo apt-get install binutils"
	echo "     In Arch, try: pacman -S binutils"
	exit 1
}

FW_REV_IN=${FW_REV_IN:-master}
BOOTLOADER_REV_IN=${BOOTLOADER_REV_IN:-master}

ARTIFACT=""
BUILD=""
FW_REV=""
if [[ ${FW_REV_IN} != http* ]] && [[ ! -f ${FW_REV_IN} ]]; then
	FW_REV=$(get_long_hash "${FIRMWARE_REPO_API_URI}" "${FW_REV_IN}")
fi

echo FW_REV:$FW_REV

BOOTLOADER_REV=""
BOOTLOADER_LOCAL_HASH=""
if [[ ${SKIP_BOOTLOADER} -eq 0 ]]; then
	if [[ ${BOOTLOADER_REV_IN} != http* ]] && [[ ! -f ${BOOTLOADER_REV_IN} ]]; then
		BOOTLOADER_REV=$(get_long_hash "${BOOTLOADER_REPO_API_URI}" "${BOOTLOADER_REV_IN}")
	fi
	echo BOOTLOADER_REV:$BOOTLOADER_REV
fi

if [[ "${FW_REV}" == "" ]]; then
	if [[ ${FW_REV_IN} != http* ]] && [[ ! -f ${FW_REV_IN} ]]; then
		IFS=':' read ARTIFACT BUILD <<<${FW_REV_IN}
		if [[ "${BUILD}" == "" ]]; then
			BUILD="bcmrpi bcm2709 bcm2711 bcm2711_rt bcm2712"
		fi
		if [[ "${ARTIFACT}" == pulls/* ]]; then
			PULL=${ARTIFACT##*/}
			ARTIFACT=$(eval curl ${CURL_OPTIONS_API} -s "${LINUX_REPO_API_URI}/pulls/${PULL}" | awk '/"sha":/ {gsub(/"/, "", $2); gsub(/,/, "", $2); print $2; exit}')
        else
			ARTIFACT=$(eval curl ${CURL_OPTIONS_API} -s "${LINUX_REPO_API_URI}/actions/artifacts?per_page=100" | grep -A1 "\"head_branch\": \"${FW_REV_IN}\"" | awk '/"head_sha":/ {gsub(/"/, "", $2); gsub(/,/, "", $2); print $2; exit}')
		fi
	else
		ARTIFACT=${FW_REV_IN}
		BUILD=dummy
	fi
	FW_REV=${ARTIFACT}
	SKIP_FIRMWARE=1
	SKIP_SDK=1
	SKIP_VCLIBS=1
fi

if [[ "${FW_REV}" == "" ]] && [[ "$FW_REPOLOCAL" == "${WORK_PATH}/.rpi-firmware" ]]; then
	echo " *** Invalid hash given"
	exit 1
fi

if [ ! -d "/lib/firmware/raspberrypi/bootloader-2711/latest" ]; then
	if [[ "${SKIP_BOOTLOADER}" != 1 ]]; then
		# The chip specific firmware directory structure is required for rpi-eeprom updates
		# RPi OS Bookworm or newer required.
		SKIP_BOOTLOADER=1
		echo "rpi-eeprom firmware package appears to be too old. Skipping bootloader updates"
	fi
fi

if [[ ! -f "${FW_REVFILE}" ]]; then
	LOCAL_HASH=0
	echo " *** We're running for the first time"
	if [[ ${JUST_CHECK} -ne 0 ]]; then
		echo " *** Firmware update required. No local hash to compare to."
		exit 2
	fi
	do_backup
else
	if [[ "${ARTIFACT}" != "" ]]; then
		LOCAL_HASH=$(cat "${FW_REVFILE}")
		if [[ "${SKIP_BOOTLOADER}" -eq 0 ]]; then
			BOOTLOADER_LOCAL_HASH=$(cat "${BOOTLOADER_REVFILE}")
		fi
	else
		LOCAL_HASH=$(get_long_hash ${FIRMWARE_REPO_API_URI} "$(cat "${FW_REVFILE}")")
		if [[ "${SKIP_BOOTLOADER}" -eq 0 ]]; then
			if [[ ! -f "${BOOTLOADER_REVFILE}" ]]; then
				BOOTLOADER_LOCAL_HASH=0
			else
				BOOTLOADER_LOCAL_HASH=$(get_long_hash "${BOOTLOADER_REPO_API_URI}"  "$(cat "${BOOTLOADER_REVFILE}")")
			fi
		fi
	fi

	if [[ "${LOCAL_HASH}" == "${FW_REV}" && "${BOOTLOADER_LOCAL_HASH}" == "${BOOTLOADER_REV}" ]] ; then
		echo " *** Your firmware is already up to date (delete ${FW_REVFILE} and ${BOOTLOADER_REVFILE} to force an update anyway)"
		exit 0
	else
		if [[ "${LOCAL_HASH}" == "${FW_REV}" ]]; then
			# Skip other components if only the bootloader has changed
			SKIP_FIRMWARE=1
			SKIP_KERNEL=1
			SKIP_VCLIBS=1
			SKIP_SDK=1
			SKIP_DOWNLOAD=1
			ARTIFACT=""
		elif [[ "${BOOTLOADER_LOCAL_HASH}" == "${BOOTLOADER_REV}" ]] ; then
			SKIP_BOOTLOADER=1
		fi
	fi

	if [[ ${JUST_CHECK} -ne 0 ]]; then
		if $(compare_hashes "${FIRMWARE_REPO_API_URI}" "${LOCAL_HASH}" lt "${FW_REV}"); then
			echo " *** Firmware update required. New commits available:"
			DIFF_URI=${FIRMWARE_REPO_API_URI}/compare/${LOCAL_HASH}...${FW_REV}
			print_diffs "${DIFF_URI}"
		elif $(compare_hashes "${FIRMWARE_REPO_API_URI}" "${LOCAL_HASH}" gt "${FW_REV}"); then
			echo " *** Firmware downgrade requested. Commits to drop:"
			DIFF_URI=${FIRMWARE_REPO_API_URI}/compare/${FW_REV}...${LOCAL_HASH}
			print_diffs "${DIFF_URI}"
		fi

		if [[ ${SKIP_BOOTLOADER} -eq 0 ]]; then
			if $(compare_hashes "${BOOTLOADER_REPO_API_URI}" "${BOOTLOADER_LOCAL_HASH}" lt "${BOOTLOADER_REV}"); then
				echo " *** Bootloader update required. New commits available:"
				DIFF_URI=${BOOTLOADER_REPO_API_URI}/compare/${BOOTLOADER_LOCAL_HASH}...${BOOTLOADER_REV}
				print_diffs "${DIFF_URI}"
			elif $(compare_hashes "${BOOTLOADER_REPO_API_URI}" "${BOOTLOADER_LOCAL_HASH}" gt "${BOOTLOADER_REV}"); then
				echo " *** Bootloader downgrade requested. Commits to drop:"
				DIFF_URI=${BOOTLOADER_REPO_API_URI}/compare/${BOOTLOADER_REV}...${BOOTLOADER_LOCAL_HASH}
				print_diffs "${DIFF_URI}"
			fi
		fi
		exit 2
	fi
fi

do_update