microsoft · bobbrow · Apr 26, 2025 · Apr 30, 2025 · Apr 30, 2025 · Apr 30, 2025
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "使用 {0} 重新启动",
-	"walkthrough.windows.background.dev.command.prompt": " 你使用的是具有 MSVC 编译器的 Windows 计算机，因此需要从 {0} 启动 VS Code，以正确设置所有环境变量。要使用 {1} 重新启动，请:",
 	"walkthrough.open.command.prompt": "通过在 Windows“开始”菜单中键入“{1}”打开 {0}。选择 {2} 将自动导航到当前打开的文件夹。",
 	"walkthrough.windows.press.f5": "在命令提示符中键入“{0}”，然后按 Enter。此操作应会重新启动 VS Code 并将你带回此演练。"
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "使用 {0} 重新啟動",
-	"walkthrough.windows.background.dev.command.prompt": " 您正使用 Windows 電腦搭配 MSVC 編譯器，因此您必須從 {0} 啟動 VS Code，以便正確設定所有環境變數。若要使用 {1} 以下重新啟動:",
 	"walkthrough.open.command.prompt": "在 Windows [開始] 功能表中輸入 \"{1}\"，以開啟 {0}。選取 {2}，這會自動瀏覽至您目前開啟的資料夾。",
 	"walkthrough.windows.press.f5": "在命令提示字元中輸入 \"{0}\"，然後按 Enter。這應該會重新啟動 VS Code，並帶您回到此逐步解說。"
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "Znovu spustit pomocí {0}",
-	"walkthrough.windows.background.dev.command.prompt": " Používáte počítač s Windows s kompilátorem MVSC, takže musíte spustit VS Code z {0}, aby se všechny proměnné prostředí správně nastavily. Opětovné spuštění pomocí nástroje {1}:",
 	"walkthrough.open.command.prompt": "Otevřete {0} zadáním „{1}“ v nabídce Start ve Windows. Vyberte {2}, čímž automaticky přejdete do aktuální otevřené složky.",
 	"walkthrough.windows.press.f5": "Do příkazového řádku zadejte „{0}“ a stiskněte Enter. Mělo by se znovu spustit VS Code a vrátit se k tomuto názorném postupu. "
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "Mit dem {0} neu starten",
-	"walkthrough.windows.background.dev.command.prompt": " Sie verwenden einen Windows-Computer mit dem MSVC-Compiler. Daher müssen Sie VS Code aus dem {0} starten, damit alle Umgebungsvariablen ordnungsgemäß festgelegt werden. So initiieren Sie den Neustart mithilfe von {1}:",
 	"walkthrough.open.command.prompt": "Öffnen Sie die {0}, indem Sie im Windows-Startmenü „{1}“ eingeben. Wählen Sie {2} aus, das Sie automatisch zu Ihrem aktuell geöffneten Ordner navigiert.",
 	"walkthrough.windows.press.f5": "Geben Sie „{0}“ in die Eingabeaufforderung ein, und drücken Sie die EINGABETASTE. Dies sollte VS Code neu starten und Sie zu dieser exemplarischen Vorgehensweise zurückkehren. "
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "Volver a iniciar con el {0}",
-	"walkthrough.windows.background.dev.command.prompt": " Está usando una máquina Windows con el compilador de MSVC, por lo que debe iniciar VS Code desde el {0} para que todas las variables de entorno se establezcan correctamente. Para volver a iniciar con el {1}:",
 	"walkthrough.open.command.prompt": "Abra {0} escribiendo '{1}' en el menú Inicio de Windows. Selecciona el {2}, que irá automáticamente a la carpeta abierta actual.",
 	"walkthrough.windows.press.f5": "Escriba '{0}' en el símbolo del sistema y pulse Entrar. Esto debería reiniciar VS Code y hacerte volver a este tutorial. "
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "Relancer à l’aide du {0}",
-	"walkthrough.windows.background.dev.command.prompt": " Vous utilisez une machine Windows avec le compilateur MSVC. Vous devez donc démarrer VS Code à partir de l’{0} pour que toutes les variables d’environnement soient correctement définies. Pour relancer en tirant parti de l’{1} :",
 	"walkthrough.open.command.prompt": "Ouvrez le {0} en tapant « {1} » dans le menu Démarrer de Windows. Sélectionnez le {2}, qui accède automatiquement à votre dossier ouvert actuel.",
 	"walkthrough.windows.press.f5": "Tapez « {0} » dans l’invite de commandes et appuyez sur Entrée. Vous devriez relancer VS Code et revenir à cette procédure pas à pas. "
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "Riavvia utilizzando il {0}",
-	"walkthrough.windows.background.dev.command.prompt": " Si sta usando un computer Windows con il compilatore MSVC, quindi è necessario avviare VS Code da {0} per impostare correttamente tutte le variabili di ambiente. Per riavviare usando {1}:",
 	"walkthrough.open.command.prompt": "Aprire il {0} digitando \"{1}\" nel menu Start di Windows. Selezionare il {2}, che passerà automaticamente alla cartella aperta corrente.",
 	"walkthrough.windows.press.f5": "Digitare \"{0}\" nel prompt dei comandi e premere INVIO. È consigliabile riavviare VS Code e tornare a questa procedura dettagliata. "
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "{0} を使用して再起動する",
-	"walkthrough.windows.background.dev.command.prompt": " MSVC コンパイラで Windows マシンを使用しているため、すべての環境変数を正しく設定するには、{0} から VS Code を開始する必要があります。{1} を使用して再起動するには:",
 	"walkthrough.open.command.prompt": "Windows スタート メニューで \"{1}\" と入力して、{0} を開きます。{2} を選択すると、現在開いているフォルダーに自動的に移動します。",
 	"walkthrough.windows.press.f5": "コマンド プロンプトに \"{0}\" と入力して Enter キーを押します。これにより、VS Code が再起動され、このチュートリアルに戻ります。"
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "{0}을(를) 사용하여 다시 시작",
-	"walkthrough.windows.background.dev.command.prompt": " MSVC 컴파일러와 함께 Windows 컴퓨터를 사용하고 있으므로 모든 환경 변수를 올바르게 설정하려면 {0}에서 VS Code를 시작해야 합니다. {1}을(를) 사용하여 다시 시작하려면 다음을 수행하세요.",
 	"walkthrough.open.command.prompt": "Windows 시작 메뉴에 \"{1}\"을(를) 입력하여 {0}을(를) 엽니다. {2}을(를) 선택하면 현재 열려 있는 폴더로 자동으로 이동합니다.",
 	"walkthrough.windows.press.f5": "명령 프롬프트에 \"{0}\"을(를) 입력하고 Enter 키를 누릅니다. 이렇게 하면 VS Code가 다시 시작되고 이 연습으로 다시 돌아옵니다. "
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "Uruchom ponownie przy użyciu {0}",
-	"walkthrough.windows.background.dev.command.prompt": " Używasz komputera z systemem Windows i kompilatorem programu Microsoft Visual C++ z {0}, więc musisz uruchomić program VS Code od początku, aby wszystkie zmienne środowiskowe zostały poprawnie ustawione. Aby ponownie uruchomić przy użyciu {1}:",
 	"walkthrough.open.command.prompt": "Otwórz pozycję {0}, wpisując „{1}” w menu Start systemu Windows. Wybierz {2}, który automatycznie przeniesie do bieżącego otwartego folderu.",
 	"walkthrough.windows.press.f5": "Wpisz „{0}” w wierszu polecenia i naciśnij klawisz Enter. To powinno ponownie uruchomić program VS Code i przenieść Cię z powrotem do tego przewodnika. "
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "Reiniciar usando o {0}",
-	"walkthrough.windows.background.dev.command.prompt": " Você está usando um computador Windows com o compilador do MSVC, portanto, é necessário iniciar o VS Code a partir do {0} para que todas as variáveis de ambiente sejam definidas corretamente. Para reiniciar usando o {1}:",
 	"walkthrough.open.command.prompt": "Abra o {0} digitando \"{1}\" no menu Iniciar do Windows. Selecione o {2}, que navegará automaticamente para a pasta atualmente aberta.",
 	"walkthrough.windows.press.f5": "Digite \"{0}\" na solicitação de comando e pressione enter. Isso deve relançar o VS Code e levá-lo de volta a este tutorial. "
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "Перезапустить с помощью {0}",
-	"walkthrough.windows.background.dev.command.prompt": " Вы используете компьютер Windows с компилятором MSVC, поэтому вам необходимо запустить VS Code из {0}, чтобы все переменные среды были установлены правильно. Для перезапуска с помощью {1}:",
 	"walkthrough.open.command.prompt": "Откройте {0}, введя \"{1}\" в меню \"Пуск\" в Windows. Выберите {2}. Вы автоматически перейдете к текущей открытой папке.",
 	"walkthrough.windows.press.f5": "Введите \"{0}\" в командную строку и нажмите ВВОД. Это должно перезапустить VS Code и вернуть вас к этому пошаговому руководству. "
 }
@@ -4,8 +4,6 @@
  *--------------------------------------------------------------------------------------------*/
 // Do not edit this file. It is machine generated.
 {
-	"walkthrough.windows.title.open.dev.command.prompt": "Sayfayı kullanarak yeniden {0}",
-	"walkthrough.windows.background.dev.command.prompt": " MSVC derleyicili bir Windows makinesi kullanıyorsunuz, dolayısıyla tüm ortam değişkenlerinin doğru ayarlanması için {0} öğesinden VS Code'u başlatmanız gerekiyor. {1} kullanarak yeniden başlatmak için:",
 	"walkthrough.open.command.prompt": "Windows Başlat menüsüne “{1}” yazarak {0} öğesini açın. Mevcut açık klasörünüze otomatik olarak gidecek olan {2} öğesini seçin.",
 	"walkthrough.windows.press.f5": "Komut istemine \"{0}\" yazın ve enter tuşuna basın. Bu, VS Code'u yeniden başlatmalı ve sizi bu izlenecek yola geri götürmelidir. "
 }
@@ -3376,6 +3376,12 @@
                         "default": "default",
                         "markdownDescription": "%c_cpp.configuration.copilotHover.markdownDescription%",
                         "scope": "window"
+                    },
+                    "C_Cpp.persistVsDeveloperEnvironment": {
+                        "type": "boolean",
+                        "default": true,
+                        "markdownDescription": "%c_cpp.configuration.persistVsDeveloperEnvironment.description%",
+                        "scope": "window"
                     }
                 }
             }
@@ -3541,6 +3547,16 @@
                 "category": "C/C++",
                 "icon": "$(run)"
             },
+            {
+                "command": "C_Cpp.SetVsDeveloperEnvironment",
+                "title": "%c_cpp.command.SetVsDeveloperEnvironment.title%",
+                "category": "C/C++"
+            },
+            {
+                "command": "C_Cpp.ClearVsDeveloperEnvironment",
+                "title": "%c_cpp.command.ClearVsDeveloperEnvironment.title%",
+                "category": "C/C++"
+            },
             {
                 "command": "C_Cpp.AddDebugConfiguration",
                 "title": "%c_cpp.command.AddDebugConfiguration.title%",
@@ -6012,6 +6028,14 @@
                     "command": "C_Cpp.BuildAndRunFile",
                     "when": "editorLangId =~ /^(c|(cuda-)?cpp)$/ && config.C_Cpp.debugShortcut && cpptools.buildAndDebug.isSourceFile"
                 },
+                {
+                    "command": "C_Cpp.SetVsDeveloperEnvironment",
+                    "when": "workspacePlatform == windows"
+                },
+                {
+                    "command": "C_Cpp.ClearVsDeveloperEnvironment",
+                    "when": "workspacePlatform == windows"
+                },
                 {
                     "command": "C_Cpp.AddDebugConfiguration",
                     "when": "config.C_Cpp.debugShortcut && cpptools.buildAndDebug.isFolderOpen"
@@ -6636,6 +6660,8 @@
         "node-fetch": "^2.7.0",
         "node-loader": "^2.0.0",
         "node-stream-zip": "^1.15.0",
+        "node-vcvarsall": "^1.1.0",
+        "node-vswhere": "^1.0.2",
         "plist": "^3.1.0",
         "posix-getopt": "^1.2.1",
         "shell-quote": "^1.8.1",
@@ -6651,4 +6677,4 @@
         "postcss": "^8.4.31",
         "gulp-typescript/**/glob-parent": "^5.1.2"
     }
-}
+}
@@ -37,6 +37,8 @@
     "c_cpp.command.RemoveAllCodeAnalysisProblems.title": "Clear All Code Analysis Problems",
     "c_cpp.command.BuildAndDebugFile.title": "Debug C/C++ File",
     "c_cpp.command.BuildAndRunFile.title": "Run C/C++ File",
+    "c_cpp.command.SetVsDeveloperEnvironment.title": "Set Visual Studio Developer Environment",
+    "c_cpp.command.ClearVsDeveloperEnvironment.title": "Clear Visual Studio Developer Environment",
     "c_cpp.command.AddDebugConfiguration.title": "Add Debug Configuration",
     "c_cpp.command.GenerateDoxygenComment.title": "Generate Doxygen Comment",
     "c_cpp.command.addSshTarget.title": "Add SSH target",
@@ -843,6 +845,7 @@
         ]
     },
     "c_cpp.configuration.debugShortcut.description": "Show the \"Run and Debug\" play button and \"Add Debug Configuration\" gear in the editor title bar for C++ files.",
+    "c_cpp.configuration.persistVsDeveloperEnvironment.description": "Remember the last used Visual Studio developer environment for the current workspace. This setting is only applicable for Windows.",
     "c_cpp.debuggers.pipeTransport.description": "When present, this tells the debugger to connect to a remote computer using another executable as a pipe that will relay standard input/output between VS Code and the MI-enabled debugger backend executable (such as gdb).",
     "c_cpp.debuggers.pipeTransport.default.pipeProgram": "enter the fully qualified path for the pipe program name, for example '/usr/bin/ssh'.",
     "c_cpp.debuggers.pipeTransport.default.debuggerPath": "The full path to the debugger on the target machine, for example /usr/bin/gdb.",
@@ -1003,9 +1006,9 @@
     "c_cpp.debuggers.logging.category.warning.description": "Logs that highlight an abnormal or unexpected event in the application flow, but do not otherwise cause the application execution to stop.",
     "c_cpp.debuggers.logging.category.error.description": "Logs that highlight when the current flow of execution is stopped due to a failure. These should indicate a failure in the current activity, not an application-wide failure.",
     "c_cpp.debuggers.logging.category.none.description": "Not used for writing log messages. Specifies that a logging category should not write any messages.",
-    "c_cpp.walkthrough.title": "Get Started with C++ Development",
+    "c_cpp.walkthrough.title": "Get started with C++ development",
     "c_cpp.walkthrough.description": "Dive into VS Code's rich C++ development experience.",
-    "c_cpp.walkthrough.set.up.title": "Set up your C++ Environment",
+    "c_cpp.walkthrough.set.up.title": "Set up your C++ environment",
     "c_cpp.walkthrough.activating.description": "Activating the C++ extension to determine whether your C++ Environment has been set up.\nActivating Extension...",
     "c_cpp.walkthrough.no.compilers.windows.description": "We could not find a C++ compiler on your machine, which is required to use the C++ extension. Follow the instructions on the right to install one, then click “Find my new Compiler” below.\n[Find my new Compiler](command:C_Cpp.RescanCompilers?%22walkthrough%22)",
     "c_cpp.walkthrough.no.compilers.description": {
@@ -1025,15 +1028,15 @@
     },
     "c_cpp.walkthrough.create.cpp.file.altText": "Open a C++ file or a folder with a C++ project.",
     "c_cpp.walkthrough.command.prompt.title": {
-        "message": "Launch from the Developer Command Prompt for VS",
+        "message": "Apply the Visual Studio developer environment",
         "comment": [
-            "{Locked=\"Developer Command Prompt for VS\"}"
+            "{Locked=\"Visual Studio\"}"
         ]
     },
     "c_cpp.walkthrough.command.prompt.description": {
-        "message": "When using the Microsoft Visual Studio C++ compiler, the C++ extension requires you to launch VS Code from the Developer Command Prompt for VS. Follow the instructions on the right to relaunch.\n[Reload Window](command:workbench.action.reloadWindow)",
+        "message": "When using the Microsoft Visual Studio C++ compiler, the Visual Studio developer environment must be present.\n\nFollow the instructions on the right to relaunch or click the button below.\n[Set Developer Environment](command:C_Cpp.SetVsDeveloperEnvironment?%22walkthrough%22)",
         "comment": [
-            "{Locked=\"Visual Studio\"} {Locked=\"C++\"} {Locked=\"VS Code\"} {Locked=\"Developer Command Prompt for VS\"} {Locked=\"\\\n[\"} {Locked=\"](command:workbench.action.reloadWindow)\"}"
+            "{Locked=\"Visual Studio\"} {Locked=\"C++\"} {Locked=\"\\\n[\"} {Locked=\"](command:C_Cpp.SetVsDeveloperEnvironment?%22walkthrough%22)\"}"
         ]
     },
     "c_cpp.walkthrough.run.debug.title": "Run and debug your C++ file",